ARD Plastic and Rubber Coating 50ml

ARD Plastic and rubber coating (also called trim coating or restoration coating) is used to restore faded plastics/rubber, deepen color, and protect against UV, oxidation, and dirt. Step 1: Deep Cleaning (Most Important) Before coating, the surface must be 100% clean. Wash the area with car shampoo Use an APC (all-purpose cleaner) or dedicated plastic cleaner For best results, wipe with isopropyl alcohol (IPA) to remove oils 👉 If the surface is dirty or has dressing residue, the coating will fail early. Step 2: Dry Completely Make sure the surface is fully dry No moisture should remain in pores or texture Step 3: Apply the Coating Use a foam applicator or microfiber applicator Apply a small amount (a few drops goes a long way) Spread evenly over the plastic or rubber 👉 Work in small sections to ensure even coverage. Step 4: Level / Wipe Excess After 1–5 minutes (depends on product), lightly wipe excess with a clean microfiber towel This prevents streaking or high spots Step 5: Curing Time Avoid water for 12–24 hours Full curing can take up to 24–48 hours