Mobil UNIREX N 3 - bearing grease - 390g

Mobil UNIREX N 3 - 390g cartridge Greases for high-temperature bearings UNIREX™ N are high-quality lithium complex-based greases suitable for rolling bearings operating at high temperatures. These multi-purpose greases can be used in a variety of industrial applications; they are particularly recommended for lubricating electric motors. UNIREX N greases are not recommended for conditions of very heavy loads where additional anti-seize properties are required. UNIREX N 3 meets the requirements of DIN 51825 - K3N - 20L and XBDHA 3 standards. Applications UNIREX N 2 is recommended for lubricating electric motors. It can be used in electric motors with NEMA (National Electric Manufacturer's Association) type A, B and F insulation. In most applications, UNIREX N3 is applied manually. Features and Benefits Unirex N3 grease offers excellent performance at high and low temperatures, water wash-out and corrosion resistance, and durability in various applications. Features Advantages and potential benefits Excellent high-temperature performance The lithium complex thickener is not prone to loss of consistency / leakage from bearings at temperatures up to 190°C Exceptional grease durability Laboratory tests have shown excellent results in bearings operating at temperatures up to 140°C Very good low-temperature properties Starting power demand is low at temperatures down to at least -20°C. Meets DIN 51825 requirements for torque at -20°C. Excellent mechanical stability Exhibits high resistance to consistency loss during operation Excellent water and corrosion resistance. Resistant to water washout and protects bearings from corrosion. Excellent performance in high-speed bearings. Excellent lubrication of high-speed ball bearings. Unirex N3 is recommended when the DmN speed index (revolutions x average bearing diameter) exceeds 360,000. Physicochemical properties and specifications Physicochemical properties 2 3 Viscosity grade NLGI 2 NLGI 3 Thickener type Lithium complex Lithium complex Colour, Appearance Green Green Dropping point, [°C], ASTM D2265 210 210 Oil separation, 30 hrs at 100 C, [%wt], ASTM D6184 1.5 0.6 Penetration, 100 KX, 0.1 mm, ASTM D217 25 30 Penetration, 60 cycles, 0.1 mm, ASTM D217 280 235 SKF Emcor Test, Rust response, Distilled water, ASTM D6138 0, 1 0, 1 Kin. viscosity at 100°C, Base oil ref., [mm2/s], ASTM D445 12.2 12.2 Kin. viscosity at 40°C, Base oil ref., [mm2/s], ASTM D445 115 115 Viscosity index, ASTM D2270 95 95 Water Washout Test, Loss at 79°C, [%wt.], ASTM D1264 3.7 3.5