X415 ECO 8S GPS ANALOG

15-inch Professional FPV Drone Platform The X415 ECO Analog is a large 15-inch FPV drone platform developed for professional, industrial, commercial, and public-sector users who need a powerful and adaptable aircraft for technical FPV applications. With its 8S propulsion system, 637mm X-frame, XING-E 5215 500KV motors, 1573 propellers, and BLITZ H7 Pro / BLITZ E80 Pro electronics stack, the X415 ECO Analog is built for stable handling, strong lift performance, and flexible payload integration. Typical applications include infrastructure inspection support, industrial site documentation, environmental monitoring, research, training, and custom sensor integration. Highlights 15-inch Professional Platform The large 637mm X-shaped frame provides stable handling, strong lift capability, and predictable flight behaviour for professional FPV use. Powerful 8S System The combination of XING-E 5215 500KV motors, 1573 propellers, and an 8S battery setup delivers the thrust reserves needed for a large-format drone and demanding flight profiles. BLITZ H7 Pro + BLITZ E80 Pro Stack The BLITZ H7 Pro flight controller and BLITZ E80 4-IN-1 Pro ESC provide a robust electronics foundation for professional FPV operation and serviceability. High-Power Analog Video Transmission The integrated BLITZ Whoop 5.8G 2.5W VTX supports PIT, 25mW, 400mW, 1000mW, and 2500mW output modes. VTX power, channel selection, and frequency use must always comply with local regulations. Pre-Installed GPS/GNSS The X415 ECO Analog comes with GPS/GNSS pre-installed. Supported satellite systems include GPS, SBAS, Galileo, QZSS, and GLONASS. GPS can support positioning, telemetry, and rescue-related functions when correctly configured and tested. These functions should not replace proper failsafe setup, pilot training, and safe operating procedures. Flight Performance Reference values with 8S 5600mAh LiPo battery: Maximum Hover Time No load: approx. 18 min 4kg payload: approx. 7 min 6kg payload: approx. 5 min Maximum Cruise Time No load: approx. 14 min 4kg payload: approx. 5 min 6kg payload: approx. 3.5 min Actual flight time depends on payload, battery condition, wind, temperature, altitude, propeller condition, and flight style. Required to Fly Depending on the final package version, you may still need: Compatible radio controller Analog FPV goggles or analog ground station 8S LiPo battery 8S-compatible charger Payload-specific mounting hardware Battery Recommendation The reference setup is based on an 8S 5600mAh LiPo battery. For professional payload use, battery selection should be checked according to total takeoff weight, current draw, flight time target, payload position, and operating conditions. Payload flights should always be tested step by step, starting with short hover and handling checks. Technical Specifications Product Name: X4 15-inch FPV Drone Model: X415 ECO Analog 5.8G 2.5W 8S Product Type: 15-inch professional FPV drone platform Frame Layout: X-shaped Wheelbase: 637mm Flight Controller: BLITZ H7 Pro ESC: BLITZ E80 4-IN-1 Pro VTX: BLITZ Whoop 5.8G 2.5W VTX Motors: XING-E 5215 500KV Propellers: 1573 Battery System: 8S Reference Battery: 8S 5600mAh LiPo Antenna Quantity: Single antenna GNSS: Pre-installed and pre-configured GNSS Support: GPS + SBAS + Galileo + QZSS + GLONASS Weight and Dimensions Net Weight: 2228g ±5g Including propellers, nuts, antennas, and anti-slip pads. Prototype weight; mass-production weight may be updated later. Takeoff Weight: 3283g ±5g With 8S 5600mAh LiPo battery. Prototype weight; mass-production weight may be updated later. Overall Size: 544 × 544 × 65.5mm Performance Data Maximum Horizontal Speed: 140km/h Maximum Takeoff Altitude: 6000m Maximum Wind Resistance: Level 8 Operating Temperature: -10°C to 40°C Analog VTX Specifications VTX Model: BLITZ Whoop 5.8G 2.5W VTX Frequency: 5.8GHz analog Power Modes: PIT / 25mW / 400mW / 1000mW / 2500mW Input Voltage: 7–34V Channels: 40CH, A / B / E / F / R bands Antenna Connector: MMCX Mounting: 25.5 × 25.5mm, Φ1.6mm Weight: 32g Dimensions: 50 × 30 × 16mm Current at 12V: PIT: ≤140mA 25mW: ≤200mA 400mW: ≤340mA 1000mW: ≤480mA 2500mW: ≤780mA Packing List 1× X415 ECO 8S GPS ANALOG Setup Notes The X415 ECO Analog is a large and powerful professional FPV platform. It should only be set up and operated by experienced users. Before first flight: Remove propellers before configuration Check receiver and failsafe setup Confirm motor direction and propeller installation Check VTX channel, power level, and antenna installation Verify battery voltage and connector condition Check center of gravity with battery and payload Start with short low-altitude test flights FAQ Is this a complete Ready-to-Fly kit? No. This product includes 1× drone only. Battery, charger, goggles, radio controller, receiver/control link, payload equipment, and field accessories are not included. Which battery should I use? The reference data is based on an 8S 5600mAh LiPo. Does it include GPS? Yes. This model comes with GNSS pre-installed and pre-configured. It supports GPS, SBAS, Galileo, QZSS, and GLONASS. Can it carry payloads? Yes, reference flight-time data is provided for 4kg and 6kg payloads. Actual performance depends on payload shape, mounting, battery, weather, and flight style. Safety Disclaimer This is a powerful professional FPV aircraft and must be operated responsibly. Always follow local laws, radio regulations, and internal operating procedures. Remove propellers before setup or bench testing. Do not fly with damaged propellers, loose screws, damaged antennas, damaged batteries, or visible electronic damage. Payloads must be mounted securely and tested carefully. Incorrect setup, unsafe payload mounting, wrong battery use, water damage, crash damage, incorrect firmware changes, or operation outside legal limits are not considered normal manufacturing defects.