PM1000X5 ROCKFORD 5CH MARINE AMPLIFIER (75Wx4+150Wx1@4OHM/125Wx4+300Wx1@2OHM/500Wx1@1OHM)

The PM1000X5 is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications. The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known world-wide for brute power, this amplifier offers a higher level of efficiency along with a tri-stage protection that covers thermal, over-current and short circuits. Marine grade two part epoxy coating on circuit boards Marine grade stainless steel hardware Muted turn on High level input capable with Auto Turn-On circuit Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator) Stealth top mounted control panel Over current protection Short circuit protection On-board Punch EQ with +18dB boost @ 45Hz 2-Year Warranty 12dB/octave Butterworth crossover Infrasonic filter Cast aluminum heatsink 2/4 channel input switch Cta-2006 Compliant Number of Channels 5 Total Power (Sum of Rated Power) 1000 Watts Rated Power (RMS Continuous Power) 75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm Dynamic Power (PVC/PowerCube®) 115 Watts x 4 + 299 Watts x 1 @ 4-Ohms 0° Res 190 Watts x 4 + 540 Watts x 1 @ 2-Ohms 0° Res N/A + 863 Watts x 1 @ 1-Ohm 0° Res Bridgeable Yes (front/rear channels) Frequency Response Front/Rear: 20Hz - 20kHz +/-3dB Sub: 20Hz - 500Hz +/-3dB Input Sensitivity 150 mV - 12 V Circuit Topology Class Class A/B + Class BD (Sub) Efficiency (average) Front/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm Total Harmonic Distortion (THD+Noise) <1.0% Signal Input Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch Signal Output - Tone Controls Sub: 0dB to +18dB @ 45Hz Crossover Controls Front: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave Remote Controls Optional Punch Level Control (PLC2) Ready Visual Indicators Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD Power Wire Gauge 4 AWG Power Input Connector Block Speaker Wire Gauge 12 AWG Speaker Output Connector Block Cooling Convection Heatsink Operating Voltage 9 - 16 VDC Recommended Fuse (not included) 150 A Average Current Draw (13.8V Music) 75 A Max. Current Draw (13.8V Sinewave) 150 A Suggested Alternator 100 A Included In The Box Dimensions (H x W x D) 2.38 x 7.76 x 15.03 (in) 6.05 x 19.71 x 38.18 (cm) Shipping Weight 15.3 Lbs. (6.93 Kg.)