Lunatone DALI-2 4xRM16 I HS

Lunatone DALI-2 4xRM16 I HS provides 4 relay contacts, controllable via the DALI bus for inrush currents up to 350A. Thus, four loads without a DALI input and up to 3.6kW can easily be integrated into a DALI circuit and switched via DALI commands. Each channel has its own DALI address. The purposeful switching in voltage zero crossings, enables an increase of the device lifetime. Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software. The DIN rail housing with 2DU is suitable for installation in control cabinets. 1 normally open zero cross switching The product range of RM8 and RM16 also includes various housing designs and models with changeover contacts. Specifications Technical data Ambient temperature -20°C to +60°C Protection class IP20 Connection wire cross section 2.5mm² Mounting DIN Rail Electrical data Supply From DALI bus Typ. current consumption DALI 5.5mA Input DALI Relay output switch on/off voltage 250V AC Max. nominal load and circuit breaker 3000VA and 16A max Max. breaking current 20A Max. inrush current 320A Max. continuous current 16A Switching method zero cross switching Maximum switching frequency 1Hz Type of relay contact Normally open Switching operations at nominal load, resistive >10^5 Number of used DALI addresses 4 Function Device type DALI switching actuator with 4 relay contacts Configurable via DALI Cockpit Yes Number of relays 4 relay contacts Dimensions Length 98mm Width 36mm Height 56mm Colour Grey Downloads Data Sheet