Vention 27000mAh Power Bank (USB-C + USB-C/USB-C/USB-A) 140WGray LED Display Type

Vention 27000mAh 140W Power Bank (FHVH0) The Vention 27,000mAh portable power delivers up to 165W through a four-port layout — two USB-C and two USB-A — allowing users to charge a laptop, tablet, and smartphone at the same time. A full-colour TFT digital display gives real-time feedback on battery level, per-port wattage, temperature, estimated charge time remaining, and cycle count. The aluminium alloy shell adds rigidity without significantly increasing weight, and the unit meets international airline carry-on standards at 99.9Wh. 140W PD 3.1 Fast Charging The FHVH0 leads with USB Power Delivery 3.1 on its primary USB-C port (C1). PD 3.1 extends the voltage range up to 28V/5A, which is what makes 140W output possible. As a result, the unit can charge a 16-inch MacBook Pro to roughly 56% in 30 minutes and bring an iPhone 15 Pro Max to about 71% in the same window. For comparison, a standard 20W charger would reach only a fraction of those figures in the same time. The C1 port is also the fastest input port. Connected to a compatible 140W GaN wall charger, the FHVH0 can recharge itself from flat to full in approximately 1.5 to 2 hours — considerably faster than many comparable units at this capacity. Four-Port Layout and Multi-Device Charging The powerbank ships with four output ports total: USB-C1 — 140W input/output (PD 3.1). Supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A. USB-C2 — Up to 100W output. Supports the same lower voltage steps as C1. USB-A1 — Up to 20W output (5V/2.4A, 9V/2.22A). USB-A2 — Up to 18W output (5V/3A, 9V/2.22A, 12V/1.67A). When multiple ports are in use simultaneously, power sharing kicks in automatically. Running C1 and C2 together delivers up to 100W + 20W. Adding a USB-A port to that combination adjusts the distribution to 100W + 15W across the remaining active ports. Total combined output reaches a maximum of 140W regardless of configuration. TFT Smart Display Rather than a simple LED indicator, the FHVH0 uses a full-colour TFT screen. The display shows: Remaining battery percentage Real-time wattage per active port Battery cell temperature Estimated time to full charge (when recharging the bank itself) Total input and output watt-hours accumulated over the unit’s lifetime Cycle count This level of detail is particularly useful for power users who want to verify that a device is actually receiving fast-charge wattage, rather than falling back to a slower charging mode due to a cable or adapter limitation. Build Quality and Portability The FHVH0 uses a fireproof ABS and polycarbonate inner shell combined with an outer aluminium alloy casing. The finish is matte grey with a non-slip texture. The aluminium layer provides scratch resistance and improves heat dissipation during high-wattage output sessions. Physical dimensions are approximately 155 × 78 × 23mm, and weight sits at around 500g — manageable for a 27,000mAh unit. The 99.9Wh rated capacity places it just under the 100Wh IATA carry-on threshold, so the FHVH0 can be taken aboard commercial flights as cabin baggage without requiring airline approval for a high-capacity exception. Protection and Safety The FHVH0 incorporates a multi-layer protection circuit covering: Overcharge protection — cuts input before cell voltage exceeds safe limits Over-discharge protection — stops output before cell voltage drops to a damaging level Overcurrent and short-circuit protection — cuts power if a fault is detected on any port Temperature management — the display reports cell temperature; charging is throttled if thermal thresholds are exceeded The unit carries CE, FCC, and RoHS certifications. Device Compatibility The FHVH0 supports a wide range of charging protocols across its ports. It is compatible with: MacBook Pro 14″ and 16″ (via USB-C1, 140W) Dell XPS 13/15, HP Spectre, Lenovo ThinkPad (USB-C PD) iPhone 15 series (USB-C, PD 27W) Samsung Galaxy S series (USB-C, PPS/PD) iPad Pro and iPad Air (USB-C, up to 30W) Nintendo Switch (USB-C, 18W) Bluetooth headphones, smartwatches, and other low-draw USB accessories (USB-A) Who Is the Vention Laptop-carrying professionals on long travel days — The 140W C1 port can top up a MacBook Pro 16″ by over half in 30 minutes. At 99.9Wh, the unit is airline-compliant, so it travels with you in the cabin on any commercial flight. Remote workers and field staff running multiple devices — Three simultaneous charge sessions (laptop + phone + tablet) are supported without reducing the laptop port below 100W when C1 and C2 are both in use. Photographers and videographers working away from mains power — The TFT display’s cycle count and watt-hour tracking help monitor long-term battery health. The 27,000mAh capacity is sufficient to recharge a laptop battery roughly twice and a smartphone four to six times from a single bank cycle. Dual-laptop power users and mobile developers — Running USB-C1 and USB-C2 simultaneously delivers up to 100W + 20W, enough to keep two laptops topped up during a work session. Campus and classroom users — The USB-A ports (18W and 20W) cover older phones, Bluetooth accessories, and peripherals that do not have USB-C connectors, making the FHVH0 a single unit that handles mixed-generation devices in a shared workspace. Battery Parameter Value Cell type Lithium-ion Nominal capacity 27,000mAh / 3.7V Rated capacity 99.9Wh Airline compliance IATA-approved (under 100Wh carry-on limit) Input Port Voltage / Current Steps Max Input USB-C1 5V/3A · 9V/3A · 12V/3A · 15V/3A · 20V/5A · 28V/5A 140W USB-C2 5V/3A · 9V/3A · 12V/3A · 15V/3A · 20V/5A 100W Output Port Voltage / Current Steps Max Output USB-C1 5V/3A · 9V/3A · 12V/3A · 15V/3A · 20V/5A · 28V/5A 140W USB-C2 5V/3A · 9V/3A · 12V/3A · 15V/3A · 20V/5A 100W USB-A1 5V/2.4A · 9V/2.22A 20W USB-A2 5V/3A · 9V/2.22A · 12V/1.67A 18W Multi-Port Power Sharing Active Ports Power Distribution USB-C1 + USB-C2 100W + 20W USB-C1 + USB-A 100W + 18W USB-C1 + USB-C2 + USB-A 100W + 15W (shared) Maximum combined output 140W Self-Recharge Parameter Value Input standard USB PD 3.1 / PPS Recommended input adapter 140W GaN PD charger Estimated recharge time (140W input) ~1.5 – 2 hours Physical Parameter Value Housing material Aluminium alloy + fireproof ABS/PC shell Colour Gray (matte) Dimensions (approx.) 155 × 78 × 23mm Weight (approx.) ~500g Display Full-colour TFT (battery %, port wattage, temperature, cycle count, time to charge) Certifications and Compliance Standard Status CE Certified FCC Certified RoHS Compliant IATA carry-on (≤100Wh) Compliant (99.9Wh) Supported Devices (Representative) Device Port Charge Rate MacBook Pro 16″ USB-C1 Up to 140W Dell XPS / HP Spectre USB-C1 Up to 140W iPad Pro USB-C2 Up to 30W iPhone 15 series USB-C Up to 27W Samsung Galaxy S series USB-C Up to 45W (PPS) Nintendo Switch USB-C Up to 18W USB-A accessories USB-A1 / A2 Up to 20W / 18W Warranty Parameter Value Warranty period 12 months SKU FHVH0