SL100UK. AC Line Splitter for Clamp Meters

Measure AC current with a clamp meter using X1 or X10 loops, with dedicated terminals for voltage testing. The KPS-SL100UK is an AC line splitter designed to simplify current measurement on compatible mains-powered equipment using a clamp meter. It separates the live conductor from neutral and earth, allowing current to be measured without cutting or separating the conductors in the equipment's power cable. Two dedicated measurement loops provide X1 and X10 options. Use X1 to measure the actual load current or X10 to obtain a reading ten times the actual current, helping with lower-current measurements when used with a compatible clamp meter. Dedicated voltage test terminals also allow a multimeter to be connected for AC voltage measurement. By measuring voltage and current, the values can be used to calculate power using the formula power = voltage x current. Designed for UK connections, the SL100UK features a UK power plug and input socket. It supports up to 250V AC and 15A at 50–60Hz and is specified as CAT II 600V. The datasheet also lists CE certification, a compact 171 x 57 x 48mm format and a product weight of 131g. EASIER AC CURRENT MEASUREMENT: Separates the live conductor from neutral and earth, allowing a compatible clamp meter to measure current without cutting or manually separating the conductors in the equipment's power cable. Ideal for convenient current checks on compatible mains-powered equipment. X1 AND X10 MEASUREMENT LOOPS: Use the X1 loop to measure actual load current or the X10 loop to obtain a reading ten times the actual current. The two dedicated loops provide a practical way to perform current measurements with a compatible clamp meter. VOLTAGE TEST TERMINALS: Dedicated test terminals allow compatible multimeter leads to be connected for AC voltage measurement. Measure voltage alongside current when required and use both readings to calculate the connected equipment's power using voltage x current. 250V 15A CAT II 600V: Rated for a maximum input of 250V AC and 15A with a 50–60Hz frequency specification and CAT II 600V safety rating. The datasheet lists CE certification, while the manual states conformity with IEC 61010. Always observe the specified electrical limits. UK PLUG AND SOCKET DESIGN: The SL100UK features UK-style power connections for compatible equipment and includes a user manual. Before use, inspect the unit and insulation for damage, observe the 250V AC/15A maximum input and follow the supplied operating and safety instructions.