EVIL ENERGY UF192 Ignition Coil & 8.5mm Spark Plug Wire Kit for GM 5.7L LS1/LS6

---!@!start!@!---Specifications---!@!end!@!--- EVIL ENERGY UF192 Ignition Coil Set for GM LS1/LS6 Engines Brand EVIL ENERGY SKU EVBVH0001002 Product Type Ignition Coil Set OEM Replacement Reference UF192 Bundle Engine Focus GM 5.7L LS1 / LS6 V8 applications listed in the Bundle Fitment table below Spark Energy Manufacturer-stated +12% versus OE Spark Duration 2.42 ms Maximum Voltage 49,000 V Primary Resistance 1 ohm Secondary Resistance 10.9 kohm Turns Ratio 77:1 Package 8 × EVIL ENERGY UF192 replacement ignition coils EVIL ENERGY 8.5mm Spark Plug Wire Set for GM LS1/LS6 Engines Brand EVIL ENERGY SKU EVBWA0002010 Product Type Spark Plug Wire / Ignition Wire Set Bundle Engine Focus GM 5.7L LS1 / LS6 V8 applications listed in the Bundle Fitment table below Spark Plug Wire Outside Diameter 8.5 mm Reference Wire Length 8 in (manufacturer reference) Spark Plug Wire Conductor Material Stainless steel wire Spark Plug Wire Insulation Material Silicone Temperature Range -40°C to 220°C Wire Resistance 293-439 ohm per foot Spark Plug Boot Angle 45-degree DD style EMI / RFI Suppression Yes Color Red Package 8 × 8.5mm spark plug wires with pre-installed coil-end and spark-plug-end boots Bundle Fitment — Intersection Only Make Model Engine Year Pontiac GTO 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated 2004 Pontiac Firebird 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated 1998-2002 Chevrolet Corvette 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated 1998-2004 Chevrolet Camaro 5.7L 350Cu. In. V8 GAS OHV Naturally Aspirated 1998-2002 ---!@!start!@!---Description---!@!end!@!--- 5.7L LS1/LS6 Ignition Coil & 8.5mm Spark Plug Wire Kit Aging ignition coils and heat-cycled plug wires can make a 5.7L LS1 or LS6 ignition service incomplete when only one side of the system is replaced. This EVIL ENERGY kit pairs a complete replacement coil set with eight 8.5mm spark plug wires for owners servicing the selected Camaro, Corvette, Firebird, and GTO applications below, whether the vehicle is a daily driver, weekend car, or maintenance-focused restoration. The coil creates the high-voltage ignition output, while the plug wire carries that output to the spark plug. Replacing both components during the same service provides a coordinated way to address age, heat exposure, damaged boots, increased wire resistance, or an inconsistent coil-to-plug connection. This kit is a replacement and service package; actual engine operation still depends on spark plugs, wiring, grounds, fuel delivery, compression, calibration, and the condition of the remaining ignition system. Why Replace Ignition Coils and Spark Plug Wires Together? The ignition coil and spark plug wire perform different jobs in the same circuit. The ignition coil generates the high-voltage spark energy, while the spark plug wire transfers that energy from the coil to the plug. A new coil cannot correct a damaged, loose, heat-stressed, or internally high-resistance wire, and a new wire cannot correct a weak or failing coil. Servicing both components together can be useful when the vehicle has accumulated substantial mileage, when several ignition components show heat aging, or when the goal is to refresh the complete coil-to-plug path across all eight cylinders. It also makes it easier to inspect the related spark plugs, terminals, wire holders, boot clearance, and exhaust-side heat exposure during one service operation. This kit should be treated as an ignition-system service and upgrade package, not as a substitute for proper diagnosis. Misfire, rough-idle, hard-start, or hesitation symptoms can also be caused by worn spark plugs, injector or fuel-delivery faults, vacuum leaks, compression problems, wiring faults, ECU calibration, or other engine conditions. Replacement Ignition Coil Set for Selected 5.7L LS1/LS6 Applications The EVIL ENERGY replacement coil set is listed against the UF192 reference. The manufacturer lists a 49,000 V maximum voltage, 2.42 ms spark duration, 1 Ω primary resistance, 10.9 kΩ secondary resistance, and a 77:1 turns ratio. These are component specifications; they do not establish a guaranteed engine-output increase or replace diagnosis of the complete ignition and fuel systems. The set is intended for a full eight-cylinder coil service. Before ordering, compare the existing coil connector, mounting points, case shape, and wire connection with the product photos and the original parts on the vehicle. Engine swaps, aftermarket harnesses, or prior ignition conversions can change compatibility even when the vehicle model and year appear in the table. 8.5mm Spark Plug Wires for the LS Coil-to-Plug Layout The included red spark plug wire set uses a stainless steel conductor with silicone insulation and a manufacturer-listed resistance of 293-439 Ω per foot. Each wire has pre-installed coil-end and spark-plug-end boots, with a 45-degree DD-style spark plug boot for the referenced LS1/LS6 routing arrangement. The product page lists an 8-inch reference length. Compare the complete set against the original wire lengths and boot angles before installation, then route each lead without tension. A correct vehicle listing does not override differences caused by headers, relocated coils, aftermarket valve covers, or custom engine placement. Bundle Fitment for 5.7L LS1/LS6 Vehicles This bundle is limited to the following 5.7L 350 cu. in. naturally aspirated V8 applications: 1998-2002 Chevrolet Camaro, 1998-2004 Chevrolet Corvette, 1998-2002 Pontiac Firebird, and 2004 Pontiac GTO. No other vehicle, engine size, or year range is included in this bundle listing. Use the exact vehicle, year, and engine combination: Do not order from the LS1/LS6 name alone. Confirm that the vehicle retains the expected coil mounting, connectors, short coil-to-plug wire layout, and 45-degree plug-boot clearance. Modified or swapped vehicles require a direct comparison with the installed components. Package Contents 8 × Replacement Ignition Coils EVIL ENERGY coil set with UF192 replacement reference for the listed 5.7L LS1/LS6 bundle applications. 8 × 8.5mm Spark Plug Wires Red silicone-insulated ignition wires with pre-installed coil-end and 45-degree DD-style spark-plug-end boots.