Fiberon™ PA6-CF20 Black 0.5 kg

Fiberon PA6-CF20 is a nylon 6 filament filled with 20% carbon fibre. It prints stiff, strong parts that hold their shape up to 215°C. Polymaker's Fiber Adhesion technology gives it great layer bonding. It is the same formula as PolyMide PA6-CF, now under the Fiberon name, and it may print a slightly darker black. What's Included 1 × 0.5 kg spool of Fiberon PA6-CF20, 1.75 mm Recycled cardboard spool with rubber reinforced edges for better AMS compatibility Resealable bag and desiccant pack, packed in a Fiberon box Print Settings Nozzle: 280-300°C Bed: 40-50°C Chamber: room temperature Cooling fan: off Speed: up to 300 mm/s Nozzle type: hardened steel or ruby, on an all-metal hotend Dry before printing: 100°C for 10 hours Anneal after printing: 100°C for 16 hours Support: PolyDissolve S1 is the recommended support material Material Nylon 6 (PA6) reinforced with 20% carbon fibre 1.75 mm diameter, 0.5 kg of filament Heat deflection: 215°C at 0.45 MPa and 173°C at 1.8 MPa Tensile strength (X-Y): 109 MPa dry Young's modulus (X-Y): 8,637 MPa dry and 2,508 MPa wet Melting point: 218.5°C Density: 1.17 g/cm³ Flame rating: UL 94 HB at 1.5 mm Electrically insulating Good To Know Carbon fibre wears out a brass nozzle in about 9 hours of printing. Use hardened steel or ruby. Nylon pulls water from the air fast. Store and print it below 20% humidity, and dry the spool if it has been open. Parts hold their size well. Polymaker's 40 mm test print came out within 0.1 mm. If you print PA6-CF20 as its own support, take the supports off before the part soaks up moisture. Wet supports can bond to the part for good. Need more? Fiberon PA6-CF20 Black also comes on a 3 kg spool. Good For Jigs, fixtures, and end-use tooling that must stay stiff under load Brackets, mounts, and housings that sit near heat Electronics housings and precision parts that need heat resistance and insulation Automotive parts and functional prototypes