Decarboxylation Package - 300L 316L SST Dual-Jacketed Reactor With Pump

Ai 316L Grade Stainless Steel Reactor Features Dual jacketed. Sealed outer insulation jacket provides best temperature performance inside chamber All wetted parts on main vessel and lid built with pharmaceutical grade 316L SST Shell and tube heat exchanger with 70 tubes for the best condensing results ElectroPolished internal chamber Greatly reduces surface roughness by leveling micro-peaks and valleys Improved vacuum pressures, out-gassing rates, and pumping speed Prolong equipment lifespan by reducing friction and wear Much better sterilized and semiconductor grade surface Essential for the food and pharmaceutical industries https://hollandaptblog.com/2014/03/20/what-is-electropolishing-and-why-is-it-so-important-in-the-pharmaceutical-industry Detachable condenser and collection tanks Dual collection tanks with big sight glass allows you to drain without breaking vacuum High drain port clearance for easy draining or added filtration Large ports (top 12" bottom 6") allows easy chamber cleaning Top placed vacuum port on condenser provides better flow and condensing results No messy cable, with space saving integrated stirring motor controller Heavy-duty stainless-steel frame with swivel casters Built-in flashlight gives you a clear view inside the chamber Positive/negative pressure gauge Matte finish stainless steel Customizable lid for various application Tons of tri clamps adapters available, e.g. tri clamp to hose barb/KF25/NPT Choice of bolted or pin clamp for various pressure applications Flexible bellow condenser connection reduces shipping damage Electric motor and controller model is ETL certified to UL and CSA standards Peer reviewed model (pneumatic motor and controller) is approved to be used with Acetone, Ethanol, Heptane, Hexane, Isopropyl Alcohol, Methanol, and Pentane. CAUTION! Across International is not responsible for caustic chemical related damage to the stainless steel reactor internal and external parts and components. Never fill circulated heaters or chillers with water, always use Ai or manufacturer's recommended thermal fluid Always leave ample fluid space in heater reservoir to allow fluid heat expansion Always keep system vacuum passage or drain valve open when heating up circulation jackets Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits Impellar/Stirrer Options Name Stirrer Type A Anchor Stirrer Type B Piched Marine Stirrer Type C Pitched Blade Stirrer Type D Square Blade Stirrer Type E Anchor with Upper Pitched Blade Stirrer Type F Dual Pitched Blade Stirrer Type G Triple Pitched Blade Stirrer Type H Double Helix Huber Unistat T320 adapters, tubing, and fluid for Ai 300L stainless steel reactor for decarboxylation P/N 6461 x 2 90 degree M30 X 1.5 (male) to M30 X 1.5 (female) P/N 6427 x 2 Hose MT-350-2M30x1.5 (female) P/N 13255 x 2 M30 X 1.5 (male) to 1” NPT (male) P/N 6158 x 6 SilOil P20.225/275.50 (fluid) Optional chiller package for SR300 top condenser Ai C30-40-50 -30C recirculating chiller x 1 Silicone Hose x 50 Ft 3/8" barb x 1/2" mNPT adapter x 2 Dowtherm SR-1 heat transfer fluid in 5 gallon pail x 2 C30-40-50 Option 1 / CS-50 Option 2 CS50 Top Condenser Option Name (gender) Qty Part # Unit Price Total Price CS50 1 23600 G1/2" to 3/8" barb fitting 2 2294 44 88 50L of 1:1 ratio of Ethylene glycol to water 1 6171 2240 2240 Silicone Tubing to fit 3/8" barb 50 VH.50F see web SPECIFICATIONS Model SR300 Electric stirring motor 220V, 50/60Hz, 1~Phase, 200 watts, 1/4 HP Rotation: 450 rpm max. (±8%) Starting torque: 3.0 N.m Rated torque: 1.54 N.m Built-in gearbox ratio: 3:1 to 180:1 Controller: Delta, UL listed Pneumatic stirring motor - Power: 1/4 HP - Rotation: 450 rpm max. (±8%) - Compressed air pressure range: 30 to 80 psi (0.2 to 0.55 MPa) - Working temperature: -10C to +70C - For constant use: set rpm to 80% of maximum rpm - Motor lubricant Mobil Grease XHP 222, Lithium Complex, Blue, NLGI Grade 2 Check/replenish/replace every 500 hours - Air lubricant Type: JIS K2213-1 (ISOVG32) Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32 Speed: 2-3 drops per minute - For safety purpose, detach compressed air supply when not in use, left un-attended or at night - Do not run motor un-loaded - Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM - Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action. - Make sure exhaust port/hole is clear from any debris or blockage - Check every 2-3 days: Air Lubricant, Air Filter water drain Port configuration Lid: 12" triclamp Center motor port: 3" triclamp Drain port: 6" triclamp Drain port on/off valve: 2" triclamp Vacuum port: 1.5" triclamp Condenser recirculating fluid port: 1/2" female NPT Vessel jacket recirculating fluid port: 1" female NPT 50L/100L collection tank lid: 6" triclamp x 1, 1.5" triclamp x 4 Main vessel Volume: 300L Material: 316L grade stainless steel Interior finish: ElectroPolished Agitator Structure: propeller, 3-blade, dual-layer Material: 316L grade stainless steel Center fluid jacket Volume: 50L Pressure rating: 20 psi Material: 304 grade stainless steel Outer insulation jacket Sealed Material: 304 grade stainless steel Collection tank Option 1: 20L x 2, 316L stainless steel, with manifold Option 2: 50L x 1, 304 stainless steel, with dolly (15.5" diameter, 23.5" height, 30" with dolly) Option 3: 100L x 1, 304 stainless steel, with dolly (15.5" diameter, 43" height, 49.5" with dolly) Material All wetted parts 316L grade stainless steel on main reactor body Rest of reactor in 304 grade stainless steel, including motor coupling, triclamps, temp/pressure gauge adapters, and chassis. Main Condenser Style: shell and tube heat exchanger Number of tubes: 110 Condensing area: one sq meter Pressure Ultimate vacuum level: 1 Torr Temperature range -55°C to +250°C (-67°F to +482°F) Temperature sensor/display Regular: BOOST.TTA.0101, -200C to 480C, 50.5 clamp Explosion proof: BOOST.TTA.0102, -200C to 480C, 50.5 clamp Sealing gasket Food grade Viton Main Mounting Frame Heavy duty 2.5 x 2.5" 304 grade stainless steel, mounted on four casters Drain port ground clearance Drain port: 19.5 inches Drain valve: 14 inches Shipping Weight (Unit) 770 Lbs / 990 Lbs Shipping Dimensions 48 x 38 x 88" (WxDxH) Assembled Dimensions 38" x 47" x 81" (WxDxH) without 20L receiving flasks assembled 51" x 47" x 81" (WxDxH) with 20L receiving flasks assembled Compliance ETL tested to UL and CSA standards C1D1 peer review by PSI (optional) SR300 stainless steel reactor and Pump Standard package Part description Quantity SR300 Base with vessel (splash bin shown in picture is optional at extra cost) 1 Electrical Motor with controller (pre-installed) or Pneumatic Motor 1 Compressed air regulator (color may vary) Comes only with pneumatic motor 1 Battery Operated Thermocouple (pre-installed) 1 Vacuum Gauge (pre-installed) 1 Tri clamp tee 1.5” 1 Yor-Lok 12mm valve with 1.5” tri clamp adapter 1 Triclamp Vessel Sight Glass with 2x Gaskets and triclamp and flange lid (pre-installed) 1 Condenser with one sight glass and two clamped supports (each sight glass comes with 2x gaskets, triclamp, and flange lid ) (preinstalled) 1 20L Collection flask with two sight glasses (each sight glass comes with 2x gaskets, triclamp, and flange lid) 2 1.5 “ tri clamp bellow (18.5” in length ) 1 3” tri clamp bellow (14.5” and 12” in length) 2 1.5 “ 2-way tri-clamp ball valve (pre-installed) 6 1.5 “ 3-way tri-clamp ball valve (pre-installed) 1 2” tri-clamp ball valve 1 6” to 2” tri-clamp adapter (pre-installed) 1 90 degree 2” tri-clamp elbow (pre-installed) 1 Bottom Cover for Variable Frequency Drive (must be made and installed on unit) 1 90 degree 1.5” tri-clamp elbow(pre-installed) 2 Insulation Jacket 1 1.5 “ tri clamp (pre-installed) 16 2 “ tri clamp (pre-installed) 2 3” Triclamp (Preinstalled) 3 3” triclamp with bolts (preinstalled) 1 6” tri clamp with bolts (pre-installed) 1 12” tri clamp with bolts (pre-installed) 1 1.5 “ tri clamp viton gasket (pre-installed) 16 2“ tri clamp viton gasket (pre-installed) 2 3” tri clamp viton gasket (preinstalled) 4 6” tri-clamp gasket (pre-installed) 1 12” tri-clamp gaskets (pre-installed) 1 3” x 1.5” tri clamp distillation tee (preinstalled) 1 User's manual 1 2M KF25 flexible vacuum bellow 1 pc KF25 quick clamp and centering ring 2 sets KF25 to 1.5" Triclamp Adapter 1 pc 1.5" Tri-Clamp Gasket (Viton) 1 pc 1.5" Tri-Clamp Single Pin Clamp 1 pc Welch Pump 2163 Standard package Part description Quantity Welch 2163 6.1 cfm 8-head diaphragm pump 1 pc Threaded Hose Barbs (Welch PN: 710798) 2 pc Pneumatic Plastic Muffler 1 pc Power Cord with Plug 1 pc 12 mm diameter EDPM O-ring (Welch PN 829217-3) 2 pc User's manual 1 pc Tariff fees may apply. An invoice may be sent separately.