Happymodel Mobula6 Race HD BNF Built-in HDZERO AIO5 flight controller

Happymodel Mobula6 Race HD BNF Built-in HDZERO AIO5 flight controller

Brand: HappyModel
SKU: 5A10094
233.00 USD Out of stock Buy at Merchant

The Happymodel Mobula6 Race HD BNF is the first 65mm HD brushless tiny whoop that weighs less than 19.4g. With tiny whoops, every gram makes a large difference in flight performance. To achieve such a low weight, HDZero has developed the world’s first 5-in-1 AIO that contains a HDZero VTX, FC, ESC, ELRS RX, and 5V1A BEC. Using a single thick PCB rather than a stack of 2 improves durability and simplicity – get ready for a new era of no-compromise tiny whooping in clear digital video! To keep weight and cost to a minimum, the Race HD BNF features the light weight HDZero Eco camera. The camera outputs HD composite video (720p) via a single wire instead of a MIPI cable, reducing footprint, cost, and increasing durability. The digital video signal has stable color reproduction and 720p progressive scan video with the stable near-zero latency HDZero is known for. In order to achieve the goal of extreme weight reduction, HAPPYMODEL used original Japanese RENY screws at all costs, and also designed a lighter 5.8G VTX antenna. All these improvements are to make this HD BNF weigh less than 20 grams. We hope you like it. Binding procedure: Specifications Weight: 19.3g Recommended Battery: 1S 300mAh Propeller Size: 31mm Flight time: around 2.5~3 minutes Factory SKU: 5A10094 AIO Flight controller MCU: STM32F411 (100MHz, 512K Flash) Gyro: BMI270 On board voltage and amperage meters Built-in 5A(each) BLHeli_S 4-in-1 ESC Built-in 5.8G HDZero VTX Built-in SPI ExpressLRS 2.4GHz receiver Built-in 5V 1A BEC Board size:28.5×28.5mm with a 25.5×25.5 mounting hole size Firmware target: CRAZYBEEF4SX1280 HDZero Eco Camera Sensor size: 1/3 inch Resolution: 720p60 4:3 FOV: D:150° H:120° V:98° Motors Kv:28000 Stator diameter: 7mm Stator length:2mm Shaft diameter: Φ1mm Weight:1.5g Included 1x Happymodel Mobula6 Race HD BNF 1x Spare canopy 1x Spare propeller(set) 1x Screw driver 1x propeller disassemble tool Default port and receiver settings: Default factory dump file for betaflight 4.4.2 Mobula6 RACE HD dump file for BF4.4.2

Variants (1)
  • Default Title — 233.00 USD — Out of stock

AI Readiness

Good foundation, but some important product data is still missing.

89%