Small Drill Mixer Paddle - Plastic Power Mixer for Resin, Gelcoat & Fillers
The small drill mixer is how you get a consistent mix in a pint or quart cup without beating air into it by hand. Chuck the hex shank into any cordless drill, keep the head buried, and a minute at low speed blends catalyzed resin, gelcoat, or a silica-thickened paste more completely than a stick ever will. That matters most on filler mixes, where an unmixed pocket is a soft spot in the cured repair. Specs: Rigid plastic paddle head sized for pint and quart mixing cups Hex shank will not slip in the drill chuck Solvent resistant, wipes clean with acetone before the batch kicks, or treat it as a disposable at this price Color varies with production run (white, black, or blue), same paddle either way What it mixes: polyester and epoxy resin batches, gelcoat with pigment, fumed silica and microballoon filler pastes, fairing compound. For gallon pails and 5 gallon buckets step up to our 16 inch steel power mixer. Grab a 5 or 10 pack if you spray gelcoat or run filler batches often. A fresh paddle per batch means no cured chunks from the last mix ending up in this one.