12V Water Pump & Accumulator Set 10L 30PSI
This 10L/min 30 PSI 12V water pump and accumulator set provides a neat, ready-assembled solution for campervan, motorhome and caravan fresh water systems. The system combines a 10 litre per minute quad diaphragm pressure pump with an accumulator tank to provide a smooth, consistent water supply to taps and showers. The accumulator helps reduce water pulsing and rapid pump cycling, resulting in quieter operation and more stable water pressure. Both the pump and accumulator are pre-mounted onto a sturdy panel, saving installation time and giving you a much neater finished system. Spacers are fitted beneath the components to ensure the pump and accumulator sit at the same height, keeping the connecting pipework correctly aligned and reducing unnecessary strain on the fittings. At the heart of the system is a 10 litre per minute, 30 PSI quad diaphragm pump, paired with an accumulator tank to provide smooth and consistent water delivery. The accumulator helps reduce pulsing at taps and showers, minimises rapid pump cycling and helps the pump operate more quietly and efficiently. The pump automatically starts when a tap is opened and switches off again once the required system pressure is reached. The 30 PSI operating pressure is particularly important for leisure vehicle installations incorporating a Truma Combi boiler. Many similar pump and accumulator sets offered by other sellers use 45 PSI pumps, but this can cause issues with the pressure relief valve. A filter/strainer and 2 x 1/2" BSP to 1/2" barbed fittings are included, allowing connection to suitable 1/2" ID flexible fresh water hose. The mesh strainer helps prevent debris from reaching the pump's internal diaphragms and valves and makes it easy to see when cleaning is required. If you are using a 12mm push-fit water system, a 1/2" BSP to 12mm push-fit fittings can be purchased Key Features 12V DC fresh water pressure system 10L/min maximum flow rate 30 PSI operating pressure Quad diaphragm pressure pump Accumulator tank included Suitable for systems incorporating a Truma Combi boiler Pre-mounted onto a sturdy installation board Spacers keep the pump and accumulator correctly aligned Helps reduce water pulsing and pump cycling Filter/strainer included 2 x 1/2" BSP to 1/2" barbed fittings included Suitable for campervans, motorhomes and caravans Designed for fresh water systems What's Included? 1 x 12V 10L/min 30 PSI quad diaphragm water pump & accumulator pre mounted 1 x pump filter/strainer 2 x 1/2" BSP to 1/2" barbed fittings