Kodiak 1/8" ID Rubber Trailer Brake Hose – 3/16" Male Swivels – 192" (BH-3MFS-192)

Trailer Hydraulic Brake Hose Kodiak 1/8" ID Rubber Trailer Brake Hose – 3/16" Male Swivels – 192" Flexible 16-foot DOT brake hose with swiveling brass fittings and stainless steel flares for compatible trailer hydraulic brake systems. Part Number: BH-3MFS-192 192" Overall Length 1/8" ID Rubber Hose Key Measurements & Specs Specification Detail Part Number / SKU BH-3MFS-192 Brand Kodiak Product Type Flexible hydraulic brake hose Overall Length 192" / 16' Hose Inside Diameter 1/8" End Fittings Two male brass inverted-flare swivel fittings Fitting Size 3/16" fittings with 3/8"-24 threads Flare Material Stainless steel Quantity Included One brake hose Fitment / Application Category Details System Compatible trailer hydraulic brake systems Common Connections Trailer disc brake calipers, wheel cylinders, master cylinders and solenoid valves with matching connections Primary Fit Components accepting compatible 3/16" male inverted-flare fittings with 3/8"-24 threads Fitment Method Match hose length, fitting type, flare style and thread size to the existing brake system Important Note Confirm the required 192" length and both connection points before ordering Top Features Feature Buyer Benefit Swiveling Ends Help prevent the hose from twisting during installation Stainless Steel Flares Eliminate the tendency of brass flares to split while tightening Open Fitting Area Provides additional room for properly positioning line wrenches Extended Thread Engagement Kodiak fittings provide 40% more thread engagement than industry-standard fittings for a stronger, more secure connection Overview The Kodiak BH-3MFS-192 is a flexible rubber brake hose measuring 192 inches, or 16 feet, long with a 1/8-inch inside diameter. Each end has a swiveling male brass inverted-flare fitting with a stainless steel flare and 3/8"-24 thread. The connection style fits many compatible trailer disc brake calipers, wheel cylinders, master cylinders and solenoid valves. R&P Service Insight Long flexible brake hoses can simplify routing where a rigid brake line is impractical, but the correct connections and careful routing remain essential. Check Both Ends: Confirm that both components accept the hose’s male inverted-flare fittings and 3/8"-24 threads. Plan the Route: Keep the hose clear of sharp edges, excessive heat and moving suspension or brake components. Avoid Twisting: Use the swiveling fittings to position the hose without winding or twisting the rubber line. R&P Knowledge Hub Compatibility: Designed for compatible trailer hydraulic brake components using matching 3/16" male inverted-flare connections with 3/8"-24 threads. System Fit: Common compatible connection points include trailer disc brake calipers, hydraulic wheel cylinders, master cylinders and solenoid valves. Verify the connections on the specific system before ordering. Installation Notes: The swiveling fitting ends help prevent hose twist and leave additional open space for line-wrench access during installation. Performance Insight: Kodiak uses stainless steel flares to eliminate the tendency of brass flares to split during tightening. The brass fittings also provide 40% more thread engagement than industry-standard fittings for stronger, more leak-resistant connections. Brand & Fitment Note Selling Brand: Kodiak Product Identification: BH-3MFS-192 flexible rubber brake hose with two male swivel fittings. Application Reference: Brake calipers, wheel cylinders, master cylinders and solenoid valves are compatibility references only. The actual connection requirements must match the listed fitting and thread specifications. Before Ordering: Verify the required hose length, inside diameter, inverted-flare connection style, fitting gender and 3/8"-24 thread size. R&P Repair Insight A brake hose must be correctly routed and securely connected to maintain a dependable hydraulic brake system. Inspect the complete route and both attachment points before installation. Connection Check: Do not assume all trailer brake components use the same flare style or fitting gender. Compare both ends with the listed specifications. Length Check: Confirm that 192 inches provides the required route without stretching the hose or leaving it where it can drag, rub or become pinched. Final Inspection: After installation, bleed the hydraulic brake system and inspect every connection for fluid leakage before operating the trailer. Features Flexible 16-Foot Brake Hose The 192-inch rubber hose provides a flexible hydraulic connection for compatible trailer brake-system layouts. Male Swivel Connections Two swiveling male brass inverted-flare fittings help prevent the hose from twisting during installation. Stainless Steel Flares Stainless steel flares eliminate the tendency of brass flares to split while the fittings are being tightened. Greater Thread Engagement Kodiak fittings provide 40% more thread engagement than industry-standard fittings, creating a stronger and more leak-resistant connection. Included Components Quantity Item 1 Kodiak 1/8" ID flexible rubber brake hose, 192" long 2 Attached male brass inverted-flare swivel fittings with stainless steel flares and 3/8"-24 threads Important Fitment Note: Verify that the required hose length is 192" and that both connection points accept compatible 3/16" male inverted-flare fittings with 3/8"-24 threads. Route the hose away from sharp edges, heat sources and moving components. The hydraulic brake system must be properly bled and inspected for leaks after installation. Shop Trailer Brake Hoses & Fittings Kodiak BH-3MFS-192 brake hose, Kodiak 192 inch brake hose, 16 foot trailer brake hose, 1/8 inch ID rubber brake hose, 3/16 inch male swivel brake hose, 3/8-24 inverted flare brake hose, flexible trailer hydraulic brake line, trailer disc brake caliper hose, wheel cylinder brake hose, master cylinder brake hose, solenoid valve brake hose, DOT flex brake hose