Universal Radar Mount Kit | Falco (ST-CF)

The Falco™ Universal Radar Mount Kit (ST-CF) universal clamp-on mount base works with most saddles (see compatibility below) and attaches to the rear rails of the saddle. Our patented Falco Universal Radar Mount Kit (ST-CF) places the radar in the optimal position for use, and provides excellent leg-over clearance, while still providing space for many saddlebags without extensions (which are available for even more room). Incorporating the latest Shark Tooth - Carbon Fiber (ST-CF) connector, the Falco Universal Radar Mount Kit (ST-CF) will not allow the device to slip or rotate while riding, and is made from the latest carbon fiber reinforced polymer that has a silky black-grey appearance. Falco Universal Radar Mount Kit (ST-CF) kits can accommodate most major radar types including Garmin Varia, Bryton*, Magene*, and Wahoo* radars. ST-CF kits are made from engineering-grade carbon fiber–reinforced polymer known for its exceptional toughness, impact resistance, and high UV resistance. This material is the most durable polymer available today. Compatible with ST-CF accessories only. Made in USA Lifetime Warranty (Continental US only - all others standard warranty) * Pre-configured for Garmin quarter-turn. Bryton and Wahoo include a conversion kit. Radars shown in images are for reference only and are not included. Compatibility Features Device Compatibility:Garmin VariaRCT715RearVue 820RTL510RTL515RVR315 Bryton R300LMagene L508Wahoo TRACKRradar Saddle rails with an inside width of 1-1/4" to and outside width of 3" (32 and 75 mm) Saddle rail thickness between 6.5 and 10 mm (can be accommodate thicker rails with longer screws) See saddle compatibility details below before ordering Lightweight at 69g for a complete kit Designed for aerodynamic optimization Rubber-like Polymer anti-slip pads prevent movement on the rails Safe for carbon fiber rails Securely attached - cannot be removed without tools Fully adjustable device mount arm positioning with a non-slip interface Provides approximately 4" (102 mm) of space without extensions for most setups Optional extensions provide 1-3/8" (35 mm) of additional clearance Nylon patch screws prevent loosening Made from light, tough, heat, and UV resistant carbon fiber reinforced polymer Saddle Compatibility To check your saddle's compatibility with the Falco, measure the width between the rails. The minimum width allowed is 1-1/4" (32 mm) (A). The maximum width allowed is 3" (75 mm) measured on the outside of the rails (B). The rails can be round or oval and must be between 6.5 and 10 mm thick. When measured from the top of the bottom rails, there must be a minimum clearance of 1-1/4" (32 mm) of clearance (C) (e.g., clearance to logo plates or other obstructions).