Kaifat Microphone Cable

Kaifat Microphone Cable – Professional Balanced XLR Microphone CableThe Kaifat Microphone Cable is engineered for professional audio applications where signal integrity, noise rejection, and mechanical durability are non-negotiable. Whether you're running a live stage setup, a recording studio patch bay, or a broadcast environment, this cable delivers clean, transparent audio transmission from source to console.Technical Specifications Connector Type: XLR Male to XLR Female (3-pin) Signal Type: Balanced analog audio (differential signal path) Conductor: Oxygen-Free Copper (OFC) for minimal signal loss and superior conductivity Shielding: High-coverage spiral/braided shield for maximum EMI/RFI rejection Impedance: Matched for low-impedance microphone outputs (typically 150–600Ω sources) Capacitance: Low capacitance per metre to preserve high-frequency transient response Jacket: Flexible PVC outer jacket with high tensile strength for stage and touring use Strain Relief: Reinforced boot at both connectors to prevent cable fatigue at termination points Signal Integrity & Noise RejectionThe balanced differential signal path ensures that any common-mode noise (hum, RF interference, ground loops) induced along the cable run is cancelled at the receiving preamp's differential input stage. This makes the Kaifat Microphone Cable ideal for long cable runs in electrically noisy environments — stages, houses of worship, broadcast trucks, and recording studios alike.Construction & DurabilityThe OFC conductor core minimises resistive losses and maintains signal fidelity across the full audible frequency spectrum (20 Hz – 20 kHz). The high-coverage shield — whether spiral-wound or braided — provides consistent contact with the connector's ground shell, ensuring a low-impedance ground path that is critical for effective noise rejection. The flexible PVC jacket resists kinking and cracking under repeated coiling and uncoiling, while the moulded strain relief boots protect the solder joints from mechanical stress during live use.Ideal Applications Dynamic and condenser microphone connections to mixing consoles and audio interfaces Stage and live sound reinforcement (FOH, monitor, IEM systems) Studio recording — vocal booths, drum rooms, instrument miking Broadcast, podcast, and streaming setups Houses of worship and installed AV systems Patch bay interconnects and rack-mounted signal routing CompatibilityCompatible with all standard 3-pin XLR microphones, preamps, mixing consoles, audio interfaces, DI boxes, and outboard gear. Supports phantom power (+48V) pass-through without signal degradation.Upgrade your signal chain with the Kaifat Microphone Cable — available exclusively at Symphonymuzik.