LayLax Tokyo Marui EVOLT M4A1 Aftermarket LiPo Battery Conversion Cable (T-Type Connector) [GIGA TEC]

-You can use aftermarket batteries with the Tokyo Marui Evolt M4A1! -T-type connector specifications -Length: 130mm This conversion cable allows the Tokyo Marui EVOLT M4A1 to use third-party batteries, such as our EVO LiPo battery. While the Tokyo Marui original MS LiPo battery [stick type] has a limited capacity of only 800mAh, this adapter allows you to use a larger capacity third-party battery, allowing you to focus on the game without worrying about running out of power. Furthermore, when paired with a stock that can store the battery internally, the battery can be replaced through the rear of the buffer tube, eliminating the need to take down the gun every time you change batteries. *Compatible battery: EVO LiPo Battery 7.4V/2050mAh Mini Battery S with Worldwide Connector (T-type Connector) *A separate stock that can store a battery inside is required. EVO LiPo Battery 7.4V/1200mAh Vector & Stock Pipe-in Worldwide Connector (T-type Connector) *Assumes battery connection at the rear of the buffer tube. *When using this product, the EVOLT M4A1 will not be able to detect the battery temperature. Please manage and use the battery properly yourself. *Nickel-metal hydride batteries and 11.1V LiPo batteries will not work due to the protection function on the EVOLT M4A1. *If you use a battery with a low capacity, the protection function may activate earlier. *When firing in full auto mode, the protection function may activate early. -Compatible models: Electric gun Evolt M4A1 Carbine -Compatible stock: KRYTAC MK3 TRIDENT Stock Item code: 4580887531324 (The following content is prohibited for any unauthorized use; Rainbow 8 Hong Kong reserves the right for any legal action.) * Toys only, please be safe use of air guns and must be follow the local law requirement for all airsoft use. * * Please note: installing parts / assemble /fitting airsoft gun will need intermediate knowledge; for expert or airsoft gunsmith. Please refer to your airsoft gunsmith for proper installation / fitting. Fitting may be needed as the condition of each airsoft gun might be different. Regular maintenance is needed for all airsoft guns in order to keep it in good working condition and reduce wear out issue on parts. The actual performance is based on the overall setting on your airsoft gun. Please consult your airsoft gunsmith for advising. Strong Screw glue is needed for installation. Use a drop of screw glue when installing the screw and wait for it to dry out overnight. Damage could be caused to the screw thread if screw glue was not used. *