Shur-Lock II Coupler | No Center Stop | HDPE & PVC

Shur-Lock II Coupler | No Center Stop (NS) | For Repairs & Limited-Clearance InstallsDura-Line Shur-Lock II No-Stop Couplers are designed for repairs and limited-clearance installations. The center stop is removed so the coupler can slide completely over the end of the conduit before being repositioned across the joint.Shur-Lock II couplers can connect HDPE and PVC conduit and can also join dissimilar conduit materials, including threaded or non-threaded metal conduit and fiberglass (FRP). Stainless steel band clamps are tightened with a standard 5/16" nut driver. A pre-lubricated O-ring forms an air- and water-tight seal rated up to 125 PSI.Listing note: Certain configurations are available with ETL listing for HDPE and PVC in underground and concrete-encased applications. Specify at time of order if ETL listing is required. Not for PVC above-ground use and not premise rated.Key Features No Center Stop: Slides fully over the conduit for repairs and limited-clearance installations. Air- and Water-Tight: Pre-lubricated O-ring seal rated up to 125 PSI. No Special Tools Required: Installs with a standard 5/16" nut driver. Multi-Conduit Compatibility: For HDPE, PVC, metal, and fiberglass conduit. No ID Reduction: Maintains the conduit pathway through the connection. UV Resistant and Re-Enterable: Designed for utility conduit applications. Pull-Out Strength: 600, 700, or 1,000 lb depending on size. Specifications Nominal Size Nominal OD Duct OD Working Range Pull-Out Strength Part # 1" 1.315" 1.295"–1.335" 600 lb 20002340 1-1/4" 1.660" 1.640"–1.680" 700 lb 20000236 1-1/2" 1.900" 1.880"–1.920" 700 lb 20002341 2" 2.375" 2.355"–2.395" 700 lb 20000237 2-1/2" 2.875" 2.855"–2.895" 1,000 lb 20000238 3" 3.500" 3.480"–3.520" 1,000 lb 20000239 4" 4.500" 4.480"–4.520" 1,000 lb 20000260 5" 5.563" 5.543"–5.583" 1,000 lb 20001531 6" 6.625" 6.605"–6.645" 1,000 lb 20000261