25mm ODE STARflex Acoustic Partition Roll HP 20m x 1.2m - 24m2 per roll

25mm ODE STARflex Acoustic Partition Roll HP is a glass mineral wool insulation roll engineered specifically for acoustic partition applications, rather than general thermal use. Manufactured by ODE, an established Turkish insulation producer founded in 1985, it's designed to reduce sound transfer through internal stud partitions and floors where noise control is the priority. Each roll measures 1200mm x 20m, giving 24m² of coverage per roll, and is supplied pre-cut into two 600mm widths for a straightforward friction-fit between standard stud centres. The 25mm roll delivers a sound absorption coefficient of 0.8 to 1.0 and achieves a Euroclass A1 non-combustible reaction to fire classification to BS EN 13501-1, the highest fire rating available, making it a strong option where both acoustic performance and fire safety are specified. The pre-cut 2 x 600mm width is a genuinely useful touch: rather than handling a single wide roll and cutting it down on site, installers get two ready-sized lengths that friction-fit directly between standard stud centres. This cuts down on on-site cutting, reduces material waste and speeds up installation across partition walls and floors. 25mm ODE STARflex Acoustic Partition Roll HP is intended for use within internal stud partitions and floor voids, wherever reducing sound transmission between rooms or floors is the priority. It should be installed in line with ODE's current technical guidance and the relevant project specification. As the thinnest roll in the STARflex APR HP range, the 25mm option suits partitions where cavity depth is limited but acoustic performance still needs to be built in. Key Benefits of ODE STARflex Acoustic Partition Roll HP: Glass mineral wool acoustic partition roll designed specifically for sound control in stud partitions and floors Sound absorption coefficient of 0.8 to 1.0 Euroclass A1 non-combustible reaction to fire to BS EN 13501-1, the highest fire classification available Made from over 80% recycled glass content Supplied pre-cut into two 600mm widths for a friction-fit between standard stud centres 1200mm x 20m roll size giving 24m² coverage per roll Reduces on-site cutting and material waste compared with handling a single wide roll Suitable for domestic and light commercial internal partition work Engineered not to degrade, decompose or become mouldy over time, per ODE Good to Know: Acoustic-first, not thermal-first: STARflex APR HP is designed and specified for sound control rather than as a general thermal insulation roll. Thickness options across the range: STARflex APR HP runs from 25mm up to 100mm, so cavity depth can be matched to the acoustic performance required. Check the roll configuration before ordering: ODE's acoustic partition roll is supplied in more than one roll-length configuration across the UK market. This listing is the APR HP configuration at 1200mm x 20m, giving 24m² per roll, so confirm coverage against the spec above when comparing SKUs. For partition builds where cavity depth is tight but sound control can't be compromised, 25mm ODE STARflex Acoustic Partition Roll HP gives you a fast-fitting, high-performance option built for the job.