Temperature Controller for 15x15 & 16x24 Heat Press | Digital Meter

Temperature Controller for 15x15 & 16x24 Sublimation Heat Press The Temperature Controller for 15x15 and 16x24 Heat Press from AbhishekID is a precision digital temperature and timer meter — a drop-in spare for flat-bed 15×15 inch (38×38 cm) and 16×24 inch (40×60 cm) sublimation heat presses. When the factory controller drifts, fails, or needs replacement, this unit restores accurate heat and time control for t-shirts, fabrics, and flat substrates. Key Features Digital LCD Display: Clear readout for temperature and press time so operators can monitor each cycle in real time. Up to 250°C (482°F): Suitable for polyester sublimation, heat-transfer vinyl, and most flat blanks used on 15x15 and 16x24 presses. Dual-Size Compatibility: Designed as a replacement meter/controller for both 15x15 and 16x24 sublimation heat press machines. 220V Indian Mains: Built for standard workshop power — verify wiring and amperage against your machine manual before install. Temperature + Time Control: Fine-tune heat and dwell time to avoid over-pressing or incomplete transfers. Commercial Spare SKU: Ideal for print shops, sublimation startups, and service centres stocking heat press spare parts. What the Controller Does In a sublimation heat press, the meter/controller is the main control unit. It lets you set and monitor temperature and press time — critical for transferring designs onto fabrics, tiles, and other heat-transfer materials. Precise settings improve print clarity, colour durability, and reduce wasted blanks. How to Use / Install Disconnect mains power completely before opening the control panel. Photograph the existing wire mapping on the failed unit. Swap the controller line-for-line, matching each terminal carefully. Power on and run a low-temperature test cycle before production use. Adjust temperature and time for each substrate (fabric vs thicker blanks). Best For Owners of 15x15 or 16x24 flat sublimation heat presses needing a spare controller Print shops repairing drifted or dead digital meters Service centres stocking heat press spare parts alongside silicone beds and teflon sheets Note: This listing is for the controller/meter spare only — not a complete heat press machine. For mug and 5-in-1 combo presses, use our separate mug/5-in-1 controller SKU. 15x15 और 16x24 हीट प्रेस टेम्परेचर कंट्रोलर फ्लैट बेड सब्लिमेशन हीट प्रेस (15×15 और 16×24) के लिए डिजिटल तापमान + टाइमर मीटर — 250°C तक, 220V। स्पेयर पार्ट AbhishekID India।