Fury F5K - 2 Piece Wing

Performance While others are using converted DLG wings, the Fury is designed from the ground up based on the current F5K rules. Due to the wing loading requirements, we believe F5K models will require larger wing areas coupled with higher lift airfoils. With that in mind, the Fury’s aero is based on the BAMF with Synergy 2 airfoils but scaled up in wing area and with the airfoils redistributed. As a result, the Fury will still be able to fly ‘light’ even when flown at higher wing loadings. The Fury uses four servos installed in the belly of the fuselage, screwed down in a servo tray. Ample room in the nose allows for more gear selection based on your preference. QuikLink pushrods keep flaperons nice and tight, while the tails actuate with pull-spring like DLGs. Sample install. Servos not included. Construction For ease of transportation, the wing is removable and splits down the center. Both the fin and stabilizer are also removable, helping the Fury minimize the storage and transport footprint. The Fury is made in Ukraine along with our BAMF and Deviant models. Needless to say, the quality is top-notch with a precise fit and shiny finish. All parts are produced in CNC milled aluminum moulds, and all flying surfaces have a solid Cascell core for an incredible strength-to-weight ratio. The fuselage is carbon but has a fibreglass nose for compatibility with your radio receiver. Structure: Solid Cascell molded wing and tails Light: CW30 skin Standard: CW40 skin Strong: Co-axial CW60 skin Tails: CW20 skin 1-piece fuslage 2-piece wing (centre split) Canopy Flight Characteristics: Friendly handling Very easy to fly Forgiving to pilot errors, such as flying too slowly or with too much camber All-round model, optimized for working low and light thermals Specifications: Wingspan: 1490mm Wing area: 21.66 dm² Wing airfoil: modified Synergy 2 Horizontal tail area: 2.43 dm² Light AUW: ~265 grams Standard AUW: ~275 grams Strong AUW: ~285 grams Min F5K wing loading (12dm²): 289 grams Recommended Gear: Servos (standard build): 4* KST X08 v6, A08 v6 Servos (light build): 4* KST X06 Battery: 2S LiPo 520 mAh Motor: 1507 Powertrain, 1806 Powertrain Spinner: 25mm Propellor: to match motor ESC: 20A CN Models spinner and blades shown - Not included. Basic Setup These are the basic settings that will be a good starting point for setting up your Fury to your preferences. There are pilots flying the CG from 65-73mm, some report a slightly forward CG at 68mm for most conditions. CG: 68mm Camber Speed: 1mm reflex Cruise: 3mm down Thermal 1: 6mm down Thermal 2: 10mm down Snap Flaps: ~5mm at full elevator deflection Build Manual HERE.