60W Remote-Controlled Solar LED Area Light with Lens Tilt

Off-Grid Lighting for Streets and Paths, Built for Safety and Savings Light streets, alleys, driveways, paths, or remote worksites without trenching, conduit, utility hookups, or permitting delays. Typically covering 1,400+ sq ft* at full brightness, this commercial-grade 60W solar area light combines intelligent motion-sensing programming, a premium MPPT charging controller, a 460.8Wh LiFePO4 battery, and two independently aimable LED modules with purpose-built Type II optics to deliver precise, reliable off-grid illumination that brightens the road or path without spilling beyond. Extend Your Lighting Without Extending the Grid: Skip the trenching, conduit, and utility coordination, so lights go up where and when you need them for site expansions, new roads and paths, and temporary construction zones. The immediate savings often cover a large share of the purchase price, and every month afterward runs on sunlight instead of a utility bill. Mount It Your Way: The included mounting hardware works for post-top or side-entry mounting, a quick fit for new construction and retrofits alike. With a lighter weight (33.1lbs) and less wind vulnerability (EPA: 3.66ft2) than competing fixtures, it often works with existing poles, so solar retrofits don't become complete rebuilds. No Compromise Between Charging and Coverage: The solar panel tilts from flat to vertical (+90°) while the LED modules aim independently (±45°), so you can capture peak sun while putting the light exactly on the street, alley, or path that needs it. Unlike cheaper fixed-lens designs, aiming the light never means tilting the panel to a poor charging angle. Light When It's Needed, Not a Watt Wasted: An intelligent 4-stage night mode delivers the brightest light during high-traffic hours when motion is detected and conserves battery when the area is vacant, so you get the full safety benefit without wasting stored energy. Programmable to Fit Your Site: Switch between three preprogrammed modes with one touch of the included remote, or have our team custom-program all-night steady output at a reduced level for security perimeters, access roads, and industrial sites where predictable lighting is the priority. (An advanced remote controller is also available for reprogramming lights on site.) Designed to Handle Cloudy Stretches: A 460.8Wh LiFePO4 battery and 66W panel deliver up to 5 days of autonomy in intelligent mode, so your light stays on through extended cloudy stretches. An MPPT (Maximum Power Point Tracking) controller keeps pulling in usable power on overcast days, when a basic PWM controller in a cheaper fixture falls short. A Battery You Replace, Not Throw Away: LiFePO4 batteries typically stand up to 2,000+ charge cycles (5+ years of nightly use). When this one eventually wears down, it's field-replaceable, so you swap the battery on-site rather than tossing the whole light. Built to Run Outdoors, Year-Round: IP66 sealing keeps out dust and powerful water jets, and IK08 impact protection (excluding the panel and sensor) handles knocks, so the fixture keeps performing season after season. Ideal Applications Streets, Alleys, Driveways & Paths: Type II optics spread light wide along the route while limiting spill beyond it, a natural fit for streets, alleys, driveways, access roads, and pedestrian paths where the light needs to follow the road or path and stay off the surroundings. Remote & Rural Roadways: Farms, rural access roads, and campgrounds where extending grid power to every pole location is cost-prohibitive or impossible, and where reliable lighting still matters for safety. Construction Sites & Temporary Worksites: Light work zones, haul roads, and staging areas before grid power is available, with no trenching or utility connection to wait on. Municipalities & Public Ways: Roadside and alley lighting for municipalities where grid infrastructure is limited, aging, or absent, improving public safety without requiring an electrician for installation. Parks, Courtyards & Coastal Sites: A serviceable, long-lasting fixture keeps maintenance costs down over the life of the installation, and IP66 sealing handles driving rain and powerful water jets. Turtle-friendly options are available. Narrow Parking Lots & Linear Lots: Type II optics spread light wide along the length of the lot while limiting spill beyond it, a fit for narrow or elongated parking areas, rows of angled stalls along a road, and drive lanes where a symmetric pattern would waste light or create hazardous glare. This fixture uses a Type II distribution, which throws a wide beam with significant side spread, well suited to streets, alleys, and paths. Need Type III or Type V distribution, or wall or corner mounting? See our 60W SOLARSLA Solar Street & Area Light for a broader range of distribution and mounting choices. Frequently Asked Questions What differentiates this from a cheaper, consumer-grade equivalent? This light is designed for reliability and longevity. It uses premium components like a 460.8Wh LiFePO4 (lithium iron phosphate) battery, which provides more reliable night-to-night performance and a significantly longer service life than cheaper lithium-based alternatives. LiFePO4 batteries typically stand up to 2,000+ charging cycles, compared to just 300-500 for many cheaper alternatives, and this one is field-replaceable when it eventually wears down. Will the battery charge on cloudy or overcast days? Yes. The MPPT charge controller continues pulling in usable solar energy on overcast, rainy, or snowy days, when a standard PWM controller in a cheaper fixture would largely stop charging. The battery holds up to 5 days of reserve to carry the light through multi-day stretches of bad weather. How does this light perform in cold weather? The battery is rated to charge between 32°F and 122°F. In colder conditions, the battery can still discharge and run the light using its stored charge, but recharging slows or pauses until daytime temperatures rise back above freezing. The up-to-5-day battery reserve is built with this in mind, giving the fixture a buffer through short cold spells. How high should I mount it? We recommend mounting this model 20 to 30 ft high, which keeps the microwave motion sensor and the coverage area working reliably. For other mounting heights, custom programming, or site-specific recommendations, contact us. How do I replace the battery when it wears out? The battery is field-replaceable, so a maintenance technician can access and swap it on-site without replacing the entire fixture or even removing it from the pole. The LED modules are replaceable as well. This keeps the light in service far longer than a sealed-battery design, where the whole fixture typically must be replaced once the battery degrades. ELEDLights Stands Behind It 5-Year Warranty: Full manufacturer coverage backed by the ELEDLights team. US-based support Monday–Friday, 8am–8pm EST — call, text, or email a real person *Estimated minimum coverage at full brightness, based on typical outdoor lighting planning assumptions. Actual coverage depends on mounting height, pole spacing, and site conditions — request a free custom layout from our team for a site-specific recommendation.