Fiber Inspection Probe Kit

Description This Fiber Inspection Probe is a fully automated inspection tool that provides fast and reliable analysis of fiber optic connector end faces and bulkheads. With a single button press, the Fiber Inspection Probe tool automatically focuses, captures an image of the connector endface, and provides a pass/fail result. The pass/fail status of the connector is instantly reported via a red/green LED on the probe. Detailed results are shown on the iOS or Android app, which provides PDF report generation and sharing. Both apps are pre-loaded with pass/fail requirements from IEC 61300-3-35, as required by all major telecommunications service providers. Product Features Test ferrule end faces and bulkheads compliant to IEC61300-3-35 Single-handed, one-button operation Auto focus, auto-capture, auto test LED pass/fail indicator on probe Small form factor enables inspection of difficult-to-reach ports Create and share reports on Android and iOS devices, IEC, IPC, and user-defined inspection criteria Wide range of adapter tips Features Features Applications Verify connector cleanliness before connecting Certify connector condition on installation Document connector damage when troubleshooting Inspection is essential for proper fiber handling in all networks Pass/fail results in seconds: With the press of a single button, the FIP100 auto-focuses, captures, centers, and analyzes the end-face image to industry standard IEC 61300-3-35, IPC-8497-1, AT&T TP-76461 and other user-defined criteria. Untethered operation: One-button operation and pass/fail LED indicator enable operation without reference to the mobile app. Wide range of adapter tips: Interchangeable adapter tips support fiber connector inspection for a wide range of patch cords and bulkhead-mounted connectors having either PC/UPC or APC polished end-faces. Smart Device Apps: Auto focus, auto capture, and auto test functions IEC, IPC, industry standard, and user-defined inspection rules Pinch-to-zoom fiber end-face images Report generation Multi-language Graphical User Interface (GUI) Day/time-stamped job saving Specifications FIP100 Manual FIP100 Manual (Español) FIP100 Datasheet FIP100 Datasheet (Español) DoC FIP100 (2025) TECHNICAL SPECIFICATIONS OPTICAL PERFORMANCE FIELD OF VIEW (FOV) LIVE AND CAPTURED: 612 X 460 μM MANUAL DETECTION CAPABILITY (MINIMUM) 0.25 μM AUTO ANALYSIS RESOLUTION <1.0 μM STORED IMAGE SIZE 2592 X 1944 (5M) PIXELS END-FACE ILLUMINATION COAXIAL BLUE LED 476 NM MAXIMUM NO DAMAGE LIVE FIBER POWER LEVEL +20 DBM OPERATING FEATURES WIFI CHARACTERISTICS IEEE 802.11BNG FOCUS AUTO-FOCUS (≤3 SEC) AND MANUAL FOCUS CENTERING AUTO-CENTERING (<1 SEC) BUTTON FUNCTIONALITY POWER ON/OFF (>3 SECS); CAPTURE/ANALYSIS/AUTO-SAVE/LIVE MAIN LED FUNCTIONALITY BLUE = CONNECTED TO APP, GREEN = PASS, RED = FAIL MAGNIFICATION VARIABLE FROM 80X TO 700X, IN LIVE AND CAPTURE MODES APPLICATIONS COMPATIBILITY ANDROID ≥4.0.3, IOS ≥8.1 IMAGE CAPTURE WITH PASS/FAIL ANALYSIS IEC 61300-3-35, AT&T TP-76461, IPC-8497-1, USER-SET CRITERIA IMAGE FILE FORMAT JPEG, GIF IMAGE & PASS/FAIL RESULTS STORAGE YES FILE STORAGE CAPACITY UNLIMITED RESULT MANAGER STORAGE, RENAME, DELETE, TRANSFER REPORTING BUILT-IN FILLABLE PDF REPORTER SUPPORTED LANGUAGES ENGLISH, FRENCH, GERMAN, JAPANESE, KOREAN, RUSSIAN, SPANISH PHYSICAL AND POWER CHARACTERISTICS BATTERY TYPE LI-ION, NON-REPLACEABLE BY USER MAXIMUM CHARGER CURRENT DRAW 1.2A, BATTERY CHARGE CURRENT + DEVICE CONSUMPTION CURRENT OPERATING TIME (TYPICAL) 60 HOURS D; 8 HOURS CONTINUOUS RECHARGE TIME ≤4 HOURS LOW-BATTERY WARNING VIEWED ON SMART DEVICE CHARGING LED STATUS; VIEWED ON SMART DEVICE RED = CHARGING, GREEN = FULLY CHARGED, BLINKING RED/GREEN = BATTERY FAULT POWER SAVE FEATURES (CONTROLLED BY APP) PROBE AUTO-OFF – DISABLED, 5, 10, 30, 60 MINUTES; PROBE WIFI NOT CONNECTED – 5 MINUTES AC CHARGER VOLTAGE, FREQUENCY, CURRENT 100-240VAC, 50/60HZ, 5VDC, 2A CHARGER JACK 0.9 X 3.2 MM BARREL, CENTER (TIP) POSITIVE SIZE (MAX DIAMETER X LENGTH) Ø 40 X 226 MM (Ø 1.6 X 8.9 IN) WEIGHT 150 G (5.3 OZ) ENVIRONMENTAL CHARACTERISTICS OPERATING TEMPERATURE 0 TO +50 °C; 95% RH, NON-CONDENSING STORAGE TEMPERATURE -40 TO +70 °C; 95% RH, NON-CONDENSING COMPLIANCE CE/UKCA EU COMPLIANT TO RELEVANT EU DIRECTIVES ON HEALTH, SAFETY, AND ENVIRONMENTAL PROTECTION, AND CERTIFIED WITH CE MARKING SAFETY/EMC/EMI IEC COMPLIANT TO IEC 61010-1 FOR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT EN COMPLIANT TO EN 55011 FOR EMC REQUIREMENTS FOR INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT FCC COMPLIANT TO CODE OF FEDERAL REGULATIONS FCC 47 CFR 15 ON UNLICENSED TRANSMISSIONS ROHS EU COMPLIANT TO EU REGULATIONS DIRECTIVE 2011/65/EU (ROHS 2) AND DIRECTIVE 2015/863 (ROHS 3) TEST METHOD IEC COMPLIANT TO IEC 61300-3-35 FOR VISUAL INSPECTION OF FIBER OPTIC CONNECTORS AND FIBER-STUB TRANSCEIVERS IPC COMPLIANT TO IPC-8497-1 FOR CLEANING METHODS AND CONTAMINATION ASSESSMENT FOR OPTICAL ASSEMBLY Additional Information Product Videos INSPECTION PROBE TOOL, FOR QUICKLY IDENTIFYING FIBER OPTIC CABLE FAULTS LESS COMMON TIPS FOR FIBER INSPECTION PROBE | LONG LC? MPO? WE'VE GOT YOU COVERED! What's in the Box What's in the Box Qty 1 - Fiber Inspection Probe Qty 1 - Power supply with NA, UK & EU plug adapters Qty 1 - SC/UPC bulkhead tip & SC/UPC bulkhead Qty 1 - Carry case Qty 1 - Quick reference card