UltraScape Porcelpoint Flowable Porcelain Paving Grout – 20kg

UltraScape Porcelpoint Flowable Porcelain Paving Grout – 20kg UltraScape Porcelpoint is a high-performance flowable paving grout specifically designed for porcelain paving. Its fluid consistency allows the mixed grout to flow easily into paving joints, helping create strong, full and consistent joints with a smooth professional finish. Ideal for porcelain patios, paths, terraces and other bound paving installations, Porcelpoint is mixed with clean water before being poured over pre-wetted paving and worked thoroughly into the joints using a suitable rubber squeegee or float. Its rapid-setting formulation allows foot traffic after approximately 1 hour, helping installers complete porcelain paving projects quickly and efficiently. Designed for Porcelain Paving Porcelpoint has been developed specifically for porcelain paving installations where a clean, consistent and hard-wearing joint is required. The flowable consistency makes it particularly effective for filling joints completely, while the smooth finish complements the clean lines and precise edges of modern porcelain paving. Main Benefits ✓ Specifically developed for porcelain paving ✓ Flowable application helps completely fill paving joints ✓ Smooth, consistent and professional joint finish ✓ Suitable for joint widths from 2mm to 50mm ✓ Rapid setting for faster project completion ✓ Open to foot traffic after approximately 1 hour ✓ Strong and durable for long-lasting porcelain installations ✓ Easy to mix, pour and work into the joints ✓ Ideal for modern porcelain patios, paths and terraces ✓ Available in Limestone and Stone Grey Product Details • Product Type: Flowable porcelain paving grout • Pack Size: 20kg tub • Colours: Limestone and Stone Grey • Joint Width: 2–50mm • Set Time: Approximately 15 minutes at 20°C • Foot Traffic: Approximately 1 hour • Application: Mix with water, pour and work into joints using a suitable rubber squeegee or float • Suitable For: Porcelain paving installations Available Colours • Limestone – a lighter natural joint colour that works particularly well with beige, cream and lighter porcelain paving • Stone Grey – a versatile neutral grey ideal for grey, anthracite and contemporary porcelain paving Ideal Uses ✓ Porcelain patios ✓ Porcelain pathways ✓ Garden terraces and seating areas ✓ Large-format porcelain paving ✓ Contemporary garden designs ✓ Bound porcelain paving installations requiring narrow joints ==specification-part== Product Specifications General Manufacturer Instarmac Group plc Brand UltraScape Product Porcelpoint Product Type Flowable Porcelain Paving Grout Pack Size 20kg Tub Colours Limestone & Stone Grey Joint Requirements Joint Width 2–50mm Joint Finish Smooth, consistent finish Installation Type Bound porcelain paving installations Performance Set Time Approx. 15 minutes at 20°C Setting time will vary according to temperature and site conditions. Foot Traffic Approx. 1 hour Compressive Strength >25 N/mm² Application Temperature 5°C to 25°C Compatibility & Uses Porcelain Paving Suitable – specifically developed for porcelain paving Large Format Porcelain Suitable Patios Suitable Paths & Walkways Suitable Terraces & Seating Areas Suitable Internal / External Suitable for compatible interior and exterior porcelain paving applications Application Application Method Flowable application – mix with clean water, pour onto the prepared paving and work thoroughly into the joints using a suitable rubber squeegee or float Brush-In Product No – Porcelpoint is a flowable grout and should be properly floated or squeegeed into the joints Preparation Ensure paving and joints are clean and suitably prepared. Thoroughly pre-wet the paving before application and maintain the required surface moisture during installation. Mixing Add the specified quantity of clean water and mix until a smooth, consistent and fluid grout is achieved. Application Pour the mixed grout over the prepared porcelain paving and work it thoroughly into the joints using a suitable rubber squeegee or float, ensuring the joints are completely filled. Cleaning Once the grout has achieved sufficient initial set, remove excess material and clean the paving thoroughly in accordance with UltraScape application guidance. Trial Area A small trial area is recommended before full application to confirm compatibility and the required cleaning process. Colour Options Limestone Light natural joint colour Stone Grey Neutral grey joint colour Manufacturer Information Manufacturer Instarmac Group plc Brand UltraScape Product Range UltraScape Jointing Manufacturer Description A rapid-setting flowable paving grout developed specifically for porcelain paving installations, designed to provide strong, consistent joints with a smooth professional finish. Manufacturer Guidance Always follow the latest UltraScape technical, preparation, application and safety guidance before use. Setting and working times vary according to temperature and site conditions. Coverage depends on paving dimensions, joint width and joint depth. Porcelpoint is a flowable paving grout and should not be treated as a dry brush-in jointing compound. Always follow the latest UltraScape application guidance.