Ultimate DIY Garage Epoxy Floor Kit – (Covers 350 Sq Ft) - Flake System

Complete DIY Garage Floor Epoxy Kit – Covers 350 Square Feet Transform your garage into a professional-grade showroom floor with our Complete DIY Garage Floor Epoxy Kit. This all-in-one system includes everything you need to coat and protect up to 350 square feet of concrete with a beautiful, durable flake floor. Designed for homeowners and DIY installers, this kit makes it easy to achieve contractor-quality results without the contractor price. This is the highest quality materials manufactured by a company 20+ years in the business - The Epoxy Resin Store, USA Premium Decorative Flake System: Built to Last Our epoxy systems are formulated using high-performance industrial resins, giving your floor the durability needed to last for years. When installed correctly, this system creates a seamless, high-strength coating that protects concrete while dramatically improving the appearance of your garage. Easy to use: All of the components are premeasured and ready to use. Simply add the B bucket into the A bucket and mix. You can mix by hand or use a drill with a paddle wheel. ALL ITEMS INCLUDED: 3 - gallon kit 100% solid epoxy resin - tinted light gray. 2 - gallon kit polyaspartic topcoat (2) 18" rollers specifically designed for epoxy resin (no lint) 48" wood extension pole Wooster 18" roller frame Notched squeegee 8-12 mil Concrete patch repair kit for cracks and voids Plastic Spreader for patch repair Epoxy spike shoes Disposable Gloves (4 sets) 30 pounds of Torginol 1/4" Flakes How to Install an Epoxy Flake Garage Floor (DIY Installation Guide) Step 1 – Prepare the Concrete Proper surface preparation is the most important step for a long-lasting floor. Sweep and vacuum the entire garage floor. Remove oil, grease, or contaminants using a degreaser. Mechanically grind the concrete using a floor grinder with diamond tooling. Vacuum all dust thoroughly. Goal: The concrete should have a clean, porous profile similar to 80–100 grit sandpaper. Step 2 – Repair Cracks and Damage Before coating, repair any defects in the concrete. Fill cracks and joints with an epoxy crack repair or patching compound. Allow repairs to cure. Grind smooth if needed so the floor is level. Step 3 – Apply the Epoxy Base Coat Pour the mixed epoxy onto the floor in ribbons. Use a notched squeegee to spread the epoxy evenly. Back roll with a 3/8" lint-free roller. Coverage: Your kit covers approximately 350 square feet. Step 4 – Broadcast the Decorative Flakes Immediately after applying the epoxy base coat: Grab handfuls of decorative flakes. Toss them upward like feeding chickens. Let the flakes fall naturally onto the wet epoxy. Continue broadcasting until the entire floor is covered. Your kit includes 30 pounds of Torginol Domino flakes (1/4"), which provide excellent coverage and create a beautiful decorative finish. Step 5 – Allow the Floor to Cure Let the epoxy cure before continuing. Typical cure times: • Light foot traffic: 12–18 hours • Vehicle traffic: 48–72 hours Temperature will affect cure time. Step 6 – Scrape Excess Flakes After the epoxy cures: Use a floor scraper to remove loose flakes. Scrape in multiple directions to knock down rough edges. Vacuum all debris thoroughly. This step creates a smooth and uniform surface. Step 7 – Apply the Protective Topcoat Finish the system with a clear protective topcoat. Mix the clear coating according to instructions. Apply with a roller evenly across the floor. Allow to cure fully. The topcoat seals the flakes and provides: • chemical resistance • abrasion resistance • UV stability • long-term durability We offer full customer support and guidance