Rough Country 3" Suspension Lift Kit with Forged Upper Control Arms — 2022–2026 Ford F-150 Lightning

Three inches of lift for the F-150 Lightning, with forged aluminum upper control arms and no cutting or drilling. Rough Country's 40900 kit raises the front of the truck and levels it front to rear, clearing room for a taller tire without touching the factory frame or bodywork. Built for the weight the Lightning carries An electric truck is not a gas truck with a different engine. The Lightning carries its battery low and central, and it weighs substantially more than an equivalent combustion F-150. Suspension components on an EV truck work against more mass in every direction — under braking, in corners, and over compression. This kit addresses that with forged 6082-T6 aluminum upper control arms rather than stamped steel. Forged aluminum gives you the strength to handle the added mass while keeping unsprung weight down, which matters more on a heavy vehicle than a light one. Rubber bushings are used throughout for compliance and long service life on a daily-driven truck. What lifting does to range — the honest version Any lift changes how a vehicle moves through air, and on an EV that shows up directly as range. Raising ride height by three inches increases frontal area and disturbs the underbody airflow the Lightning was designed around. Pairing the lift with a taller, more aggressive tire adds rolling resistance and rotating mass on top of that. Expect a measurable reduction in range. How much depends far more on your tire choice than on the lift itself — a heavy mud-terrain will cost you considerably more than a moderately sized all-terrain. If maximum range is your priority, this is not the modification for you. If you want the truck to look and work the way you need it to and you are willing to trade some miles for that, this kit is a well-engineered way to get there. Reversible The kit bolts on using factory mounting points and reverses cleanly to stock configuration. Nothing is cut, drilled, or permanently modified. If the truck is leased, or you plan to sell it on, the suspension can be returned to original specification. Specifications Part number Rough Country 40900 Lift height 3 in front, levels front to rear Upper control arms Forged 6082-T6 aluminum Bushings Rubber Cutting or drilling None required Reversible to stock Yes Warranty Rough Country limited lifetime Fitment Vehicle Ford F-150 Lightning Years 2022 – 2026 Drivetrain 4WD and AWD Confirm your trim and current suspension configuration before ordering. Trucks already fitted with aftermarket suspension components may require additional parts. Before you install Download instructions HERE Alignment is required. Budget for a four-wheel alignment immediately after installation. Driving on an unaligned lifted truck will destroy a set of tires quickly. Check your tire and wheel plan first. The lift creates clearance, but final fitment depends on wheel diameter, width, offset and tire size together. Ask us before you buy wheels — getting this wrong is expensive. Recalibrate for tire size. A taller tire changes speedometer and odometer accuracy, and affects how the truck calculates remaining range. Professional installation recommended. This is a suspension component on a vehicle weighing over 6,000 lb. Torque specifications matter.