Dynaudio Evoke 20 Bookshelf Loudspeakers - WHITE - Pair - PROMOTION
SPECIAL PROMOTION Evoke 20 is a full-size stand-mounted speaker designed for almost any sized space. Its powerful 18cm mid/bass driver ensures it can flex its muscles when there’s heavy lifting to be done, while its 28mm soft-dome tweeter takes care of the fine detail. And, of course, its Danish design looks fantastic wherever you put it. Advanced driver technology The 0.4mm thick, 18cm Esotec+ woofer is made from MSP (Magnesium Silicate Polymer), a proprietary material that we’ve been using in our speaker cones for decades. It provides the perfect balance of lightness, stiffness and damping that, combined with its new strontium carbonate Ferrite+ ceramic magnet system, reproduces midrange and bass frequencies in perfect balance. The whole diaphragm is made from one piece of MSP. Rather than gluing on a dust cap or just leaving a hole, this construction makes the cone far more rigid – and means far less physical distortion. It gives a much better physical connection to the voice-coil, which means more of the coil’s motion energy is transferred to the diaphragm via the Balance Ribs around the center. Evoke 20’s 52mm voice-coil is made from aluminum. We chose that over copper for this speaker because it gives the correct balance of weight and winding height to give bass frequencies power and enough mechanical and electrical damping, while also letting midrange frequencies (where a vast amount of musical detail lies) sing through clearly. A Nomex spider keeps everything centered and moving the way it should, while the new, seamless Contour-derived surround allows a longer throw ratio for greater power and punch. The all-new Cerotar tweeter The tweeter is brand new. It’s called Cerotar, and is based on key technologies from our award-winning Esotar Forty anniversary tweeter and the mighty new Esotar3, which you’ll find in the top-of-the-line Confidence series. Like all our other tweeters, it’s a 28mm unit and uses a precision-coated soft dome. This coating is applied in exactly the correct places and thicknesses to optimize high-frequency performance – it’s a process derived from the development of our most exclusive speakers. But that’s where the similarity to everything except Confidence ends. Hidden behind the dome is a part called the Hexis: a special inner dome that shapes airflow to smooth-out the frequency response and eliminate unwanted resonances that would affect high-frequency performance. As with the Esotec+ woofer, it’s driven by a new strontium carbonate Ferrite+ ceramic magnet for increased sensitivity, improved detail resolution and a natural, dynamic response. A design for life Our design department took field trips to show-homes, home-interiors stores and real-life dwellings in Denmark to hone Evoke 20’s look. It was important for them to be able to imagine the speakers in a variety of living spaces – because, after all, that’s how most people listen. They’re on a couch, with a coffee, and a dog… That’s why the four finishes are so relatable. You can choose from Black and White High Gloss (which both use new lacquering techniques for a stunning glass-like surface), as well as the warm and organic open-veneered Walnut Wood and Blonde Wood styles. The cabinets themselves are tapered and rounded in a nod to the Contour and Confidence ranges. The mounting screws are hidden behind stylish one-piece trim rings. And because good design doesn’t age, you know they’ll look every bit as stylish when you’re still listening to them in 30 years. The new Evoke 20 Brand-new Cerotar tweeter A 28mm precision-coated soft-dome design derived directly from the award-winning Special Forty and the mighty new Confidence series. The new motor system uses strontium carbonate Ferrite+ ceramic magnets for improved sensitivity. The Hexis An ingenious inner tweeter dome that further smooths out the tweeter’s frequency response and minimizes resonances – so all you get are the desirable ones. You’ll also find Hexis in the all-new Confidence. New Esotec+ woofers New long-throw designs for improved frequency response and low-frequency dynamics. They’re all made from MSP – a material we developed in-house and have used in our high-quality drivers for decades. Timeless Danish design Simple, clean, traditional, modern and luxurious. We’ve made sure Evoke is realistic for, and sympathetic with, real homes and real lives. It’s available in four finishes: Black High Gloss, White High Gloss, Walnut Wood and Blonde Wood. Specifications Sensitivity: 86dB (2.83V/1m) IEC power handling: 180W Impedance: 6 Ω Frequency response (±3dB): 40Hz–23kHz Box principle: Bass reflex rear ported Crossover: 2-way Crossover frequency: 3200Hz Crossover topology: 2nd order Woofer: 18cm MSP cone Tweeter: 28mm Cerotar with Hexis Weight: 9.9kg/21.8lb Dimensions (W x H x D): 215x380x307mm 8.5x15.0x12.1in Dimensions with feet/grill (W x H x D): 215x380x317mm 8.5x15.0x12.5in