Solton CT 5 N

Solton CT 5 N (art. no. 13307) is a passive two-way compact line array with four 5" woofers and a 1" Neodymium compression driver, designed for discreet permanent installations and portable PA applications. At 150 x 880 x 124 mm and 8 kg it is one of the slimmest cabinets in the Solton range — mountable on a wall, column or stand in spaces where a conventional PA cabinet would be visually or proportionally out of place. Four 5" drivers and Neodymium HF — 120° x 20° coverage and 122 dB in a 150 mm profile The vertical arrangement of four 5" woofers creates a line source with 120° H x 20° V nominal coverage — wide horizontal throw across the listening area with tight vertical control that minimises ceiling and floor reflections, improving speech intelligibility and tonal consistency in acoustically challenging rooms. The 1" Neodymium compression driver takes over from the 2.1 kHz passive crossover to 20 kHz (-10 dB). PTC protection guards the HF driver under overload without compressing dynamics at normal working levels. At 97 dB sensitivity (1 W/1 m) and 122 dB continuous / 128 dB peak maximum SPL, the CT 5 N handles rooms of up to 200 people without a subwoofer for light programme content. The 4 Ω nominal impedance and single NL4 connector (pins 1+/1-) connect directly to a QX 700 or DX 43 amplifier channel. Eight M8 inserts, a pole-mount socket and the optional dual-axis WB 1 bracket (art. 12521) cover all standard mounting scenarios. A dedicated transport bag is available as art. 12624. Satellite for TWA 15 SUB and aart SUB 315 — complete system without a processor The CT 5 N is the officially recommended satellite for the TWA 15 SUB, which drives the columns directly from its built-in satellite amplifier channel (350 W / 4 Ω continuous). It is equally compatible with the aart SUB 315, which powers two 4 Ω satellites from its own amplifier stage. In both configurations the system operates without an external processor or controller — the passive crossover in the column handles the HF split, while LP crossover frequency and level are set on the subwoofer's rear panel. Black polyurea coating is moisture and scratch resistant; a White version is available on request. KEY FEATURES Type: passive, 2-way, compact line array, 4x 5" LF drivers: 4x 5" woofer, vertical line array arrangement HF driver: 1" Neodymium compression driver Crossover: passive 2.1 kHz + PTC driver protection Nominal impedance: 4 Ω Power: 320 W continuous / 1280 W peak Sensitivity: 97 dB (1 W/1 m); max. SPL: 122 dB continuous / 128 dB peak Coverage: 120° H x 20° V nominal Connector: 1x NL4 (pins 1+/1-) 8x M8, handle, pole socket; WB 1 bracket (art. 12521) optional Dimensions: 150 x 880 x 124 mm; weight: 8 kg Recommended subs: aart SUB 315, TWA 15 SUB Recommended amplifiers: QX 700, DX 43 TECHNICAL SPECIFICATIONS Art. No.: 13307 Type: passive, 2-way, compact line array LF drivers: 4x 5" woofer HF driver: 1" Neodymium compression driver Crossover: passive 2.1 kHz Protection: PTC driver protection Nominal impedance: 4 Ω Power: 320 W continuous / 1280 W peak Frequency range (-10 dB): 90 Hz – 20 kHz Frequency response (±3 dB): 100 Hz – 18 kHz Coverage pattern: 120° H x 20° V nominal Sensitivity: 97 dB (1 W/1 m) Max. SPL: 122 dB continuous / 128 dB peak Connector: 1x NL4 (pins 1+/1-) Enclosure: birch plywood Finish: black polyurea coating Fittings: 8x M8, 1x handle, pole socket; WB 1 U-bracket (art. 12521) optional Grille: black perforated steel with acoustically transparent foam backing Dimensions (WxHxD): 150 x 880 x 124 mm Weight: 8 kg Accessories: WB 1 wall bracket (art. 12521), bag (art. 12624), RM8 ring screw (art. 12516) EAN: 4262552320234