Hearthstone Stoves Bari Plus Freestanding Wood Stove

German-Engineered Rotating Wood Stove with TruHybrid™ Combustion and Included Heat-Retaining Thermal Brick The Bari Plus pairs HASE's rotating curved-glass design with TruHybrid™ catalytic combustion and included heat-retaining thermal bricks, extending gentle warmth well after the active fire declines. Key Features TruHybrid™ combustion — primary and secondary combustion plus a tertiary catalytic stage, rated at 76% HHV efficiency and EPA certified at 0.94 g/hr. Included heat-retaining thermal bricks line the firebox and fill the taller body, storing heat and releasing it gradually as the fire declines. Up to 16 hours of HeatLife™ from a single load of wood, depending on installation and operating conditions. 180° mechanical rotation — up to 90° to either side — with curved glass providing a fire view spanning up to approximately 225°. Heats up to 1,400 sq. ft., depending on home layout, climate, and installation. Built-in ash pan behind the control door for convenient ash removal. Designed and manufactured in Germany by Hase Kaminofenbau GmbH. Product Features German HASE Design The Bari Plus is designed and manufactured exclusively in Germany by Hase Kaminofenbau GmbH of Trier. Its slim cylindrical steel body, tall curved glass, and Charcoal Black Steel finish suit contemporary living spaces while keeping a compact 18.5" footprint. TruHybrid™ Combustion HearthStone's TruHybrid™ system combines primary and secondary combustion with a tertiary combustion stage in a catalyst, burning remaining gases and particulates before they reach the chimney. The Bari Plus is rated at 76% HHV efficiency and is EPA certified at 0.94 g/hr. A bypass is opened for startup and reloading, and a catalyst thermometer helps you monitor catalyst operation. Heat-Retaining Thermal Brick The Bari Plus stands taller than the standard Bari, and that added height creates room for its included heat-retaining thermal brick system. Heat-storage bricks line the firebox and upper body, absorbing heat while the fire burns and releasing it gently as the fire declines — the manufacturer positions this stored-heat mass as the key to the Bari Plus's extended HeatLife™ of up to 16 hours. 180° Rotating Fire View The Bari Plus mechanically rotates through 180° — up to 90° to either side — so the fire can face different parts of the room, while its curved glass provides a fire view spanning up to approximately 225°. The rotation can also be locked, which reduces the required clearances and hearth size shown below. Natural Convective Heat The Bari Plus heats through a combination of radiant heat from the glass and steel body and natural convective airflow around the cylinder. No blower is used or offered for this model, so it operates silently and without electricity. Available Finish and Configuration The Bari Plus is currently offered in one configuration: Finish Part ID MSRP Notes Charcoal Black Steel 8172-0115 $7,599 Wood-burning TruHybrid™ configuration; includes the heat-retaining thermal brick system and built-in ash pan. Specifications Specification Value Model Bari Plus, Model 8172 Combustion System TruHybrid™ catalytic hybrid (primary, secondary, and catalytic tertiary combustion) HHV Efficiency 76% EPA Certified Emissions 0.94 g/hr Maximum Cordwood Output 26,000 BTU/hr, per current owner's manual Heating Area Up to 1,400 sq. ft. Firebox Capacity 1.25 cu. ft. Maximum Log Length 17" loaded vertically; 9" loaded horizontally HeatLife™ Up to 16 hours Height 54.6" Diameter 18.5" Weight 425 lb Flue Exit 6" diameter, top exit Chimney 6" inside-diameter metal chimney, or masonry chimney with 6" round or 8" x 8" square flue Required Draft -0.06" to -0.10" WC; stovepipe damper required above -0.10" WC Ash Pan Built in Stove Rotation 180° mechanical rotation (up to 90° to either side), with rotation lock Fire Viewing Arc Up to approximately 225° through the curved glass Heat-Retaining Bricks Included Finish Charcoal Black Steel Country of Manufacture Germany (Hase Kaminofenbau GmbH) Certification Conforms to UL 1482-2022; certified to ULC S627:2023 (PFS Report F20-618) Clearances and Hearth Requirements The Bari Plus requires noncombustible ember protection only under and around the stove. The values below are stove-body clearances and minimum hearth sizes from the current owner's manual (R: 10/23/23); the manual separately publishes flue/stove-centerline dimensions and combustible-wall pass-through constructions that must also be observed. Installation Requirement Value Stove free to rotate Stove body to side wall 38" Stove free to rotate Stove body to rear wall 13" Stove free to rotate Minimum hearth, USA (W x D) 51" x 39-1/2" Stove free to rotate Minimum hearth, Canada (W x D) 55" x 43-1/2" Stove locked in position Stove body to side wall 13" Stove locked in position Stove body to rear wall 11" Stove locked in position, corner Stove body to either diagonal corner wall 10" Stove locked in position Minimum hearth, USA (W x D) 29" x 35" Stove locked in position Minimum hearth, Canada (W x D) 35" x 43-1/2" Front floor protection must extend 16" (USA) or 18" (Canada) measured from the glass, with an 8" reference from the firebox opening with the stove fully rotated; in Canada, 18" of floor protection is required at the sides and front. Rear floor protection is required only if the stovepipe runs horizontally rearward above the stove top. Floor protection is noncombustible ember protection only. This unit has not been tested or recommended for alcove installation. The Bari Plus is a freestanding room heater and is not to be installed in any factory-built fireplace. Some LVP/LVT flooring can begin to warp at approximately 110 F; review the current manual's flooring caution when planning floor protection. U.S. manufactured/mobile-home installation is permitted only under the exact requirements of the current manual, including permanent floor attachment, outside air in all mobile-home installations, an approved mobile-home chimney system, and no sleeping-room installation. This unit is not approved for mobile-home installation to Canadian standards. Complete installation must follow the current owner's manual and all applicable national and local requirements. Included Equipment Bari Plus stove body in Charcoal Black Steel (stove subassembly 3917-2015) Heat-retaining thermal brick system, including the Bari Plus top heat-retaining stones Built-in ash pan and ash-removal system 180° rotation mechanism with rotation lock TruHybrid™ catalytic combustor system with catalyst thermometer Lower flue-collar section (factory attached) and upper rotating flue-collar section (assembled during setup) Mounting feet with leveling hardware and the hardware kit shipped for assembly Owner's manual Compatible Accessories Accessory Part ID MSRP Compatibility Note Outside Air Adapter 91-53712 $259 Fits Bari and Bari Plus; connects to a minimum 3" outside-air duct supplied by others. The manual requires structural attachment when the outside-air system is used. 3" to 4" Outside Air Increaser 90-53308 $49 Used when adapting to the manual-supported or required 4" fresh-air intake, including U.S. mobile-home installation. The current manual also requires Mobile Home Lock Down Kit 91-99400 for applicable structural attachment; it is not listed on the current dealer pricing sheet, so please verify current availability with us before planning an installation that requires it. Warranty The Bari Plus is covered by HearthStone's limited warranty as published in the current owner's manual, where Limited Lifetime is defined as ten years. In summary, the applicable schedule covers stone, cast iron components not listed elsewhere, and the clean-burning air-supply system for the Limited Lifetime period; door handles, latches, steel components, and the firebox for five years; refractory and vermiculite components for two years; and finish, glass, the ash grate, accessories, and components not otherwise listed for one year. The catalytic combustor (Applied Ceramics model ACI-6M2) is covered under a separate catalyst warranty. Conditions and exclusions apply; see the current warranty document for complete terms. About HearthStone and HASE HearthStone Quality Home Heating Products of Morrisville, Vermont has built stoves prized for long-lasting, comfortable heat for more than four decades. The Bari and Bari Plus are contemporary stoves in the HASE family, designed and manufactured by Hase Kaminofenbau GmbH in Trier, Germany, and offered by HearthStone through authorized dealers. Cozy Glow Stoves is an authorized HearthStone dealer. Visit our Logan, Ohio showroom to see HearthStone stoves in person, or contact us with questions about the Bari Plus, current pricing, and installation planning.