Finixa Powerpeel Transparent Peelable Water-Based Coating for Spray Booth Wall Protection (5Ltr)

Finixa Powerpeel Transparent Peelable Water-Based Coating for Spray Booth Wall Protection (5Ltr) Peelable water-based coating for spray booth wall protection against overspray. Available in white and transparent, it applies in one coat with a 3 mm nozzle. Once dried, it forms a durable layer compatible with CBP coatings, allowing both layers to peel off effortlessly. Per can of 5 L. Key features • Easy peelable coating for the protection of spray booth walls against overspray • Available in white and transparent • Apply with a spray gun (2.5mm nozzle) in only 1 coat. (We suggest using our SPG 80+81) • Bidon of 5L fits perfectly in SPG 80 • Water-based product • Easy to remove with water when it’s liquid • When dried, powerpeel can’t be removed with water. This makes it possible to apply a coating from our CBP (active for 10-12 weeks). When the CBP has dried up, peel both layers off at once. • Effortlessly protect your spray cabin walls with our peelable coating Colour : Transparent Dry storage : yes Storing condition : dark Freezing resistant : no Application areas : interior, walls, lighting Coating life span : 6 months Drying duration : 80 minutes Maximum drying temperature : 60 °C Maximum temperature resistance : 120 °C PH-value :9 Removal : peelable Tacky : no Type : jerrycan Viscosity : 2800 cps Volume : 5 L Volume solids : 372 g/L Wet film thickness : 125 µm Application PWP application Directions for use Product should be applied at an average room temperature of 18-22°C. Powerpeel can be applied with: Paint roller. SPG500 spray gun, with 2.5mm nozzle, at 2.5 – 3.0 bar. SPG80 pressure tank, with 2.5mm – 3.0mm nozzle, 3.0 bar at pressure tank. Airless system, 0.017” spray opening. When used with SPG 80 pressure tank, the 5L canister fits in perfectly in the tank for faster setup and easy cleaning of the equipment. Product is ready to be used, never dilute as it will have a negative effect on the performance of the product. Spray booth application: Apply white powerpeel all over the spraybooth. Wait till dry, drying time at 20°C 40-60 min, depending on layer thickness and airflow. Cut out the silhouette of the light fixtures or windows and remove the white film. Apply transparent powerpeel to the light fixture and windows. Wait till dry, drying time at 20°C 40-60 min, depending on layer thickness and airflow. Ready to paint. Protection with tacky coating: Apply white powerpeel all over the spraybooth Wait till dry Apply 2nd layer white powerpeel all over the spraybooth Cut out the silhouette of the light fixtures or windows and remove the white film Apply transparent powerpeel to the light fixture and windows. Wait till dry. Apply a 2nd layer transparent powerpeel to the light fixture and windows. Wait till dry. Apply the full layer Finixa CBP over the pre-treated spraybooth.