Kennametal SN159-AP 50 mm Wide Entry Venturi Nozzle

The Kennametal SN159-AP 50 mm is a long venturi blast nozzle with a wide entry and a wear-resistant BP200 SiAlON liner. The nozzle is fully encased in polyurethane and features a 50 mm polyurethane thread. This makes it the most economical version in the SN159 range with a 50 mm thread. When combined with a blast hose with an internal diameter of 32 mm (1-1/4"), the wide entry provides a higher flow of air and abrasive. This can increase productivity by up to 15% compared with a standard long venturi blast nozzle. This makes the SN159-AP 50 mm particularly suitable for professional and industrial blasting applications where high productivity, low weight and a competitive purchase price are important. The BP200 SiAlON liner provides wear resistance comparable to tungsten carbide when used with standard steel shot, standard steel grit, iron silicate and aluminium silicate. At the same time, the nozzle weighs approximately half as much as a comparable tungsten carbide version and is more resistant to breakage than silicon carbide and standard silicon nitride versions. The nozzle is not recommended for use with hardened steel shot or hardened steel grit. For applications where rough handling or hardened steel abrasives are common, the T159-AP 50 mm with a tungsten carbide liner is a heavier but more impact-resistant alternative. Features Long venturi blast nozzle with a wide entry Wide entry with a diameter of 32 mm (1-1/4") Up to 15% higher productivity than a standard long venturi blast nozzle Wear-resistant BP200 SiAlON liner Approximately half the weight of a comparable tungsten carbide blast nozzle More resistant to breakage than silicon carbide and standard silicon nitride Suitable for standard steel shot, standard steel grit, iron silicate and aluminium silicate Not recommended for hardened steel shot or hardened steel grit Full polyurethane jacket Lightweight and corrosion-resistant 50 mm polyurethane thread Most economical version in the SN159 50 mm range Suitable for a blast hose with an internal diameter of 32 mm (1-1/4")