NTH29 Holster

A fast, secure home for your duty light A side-lever lock holds your Nitecore P-series light through a shift, releases it one-handed, and rotates a full 360 degrees for hands-free lighting on the belt. Fits Nitecore P27iX, P20iX, P23i and P20i UV (head 31.8 to 34mm, tube 25.4 to 26mm) Side-lever locking mechanism for a one-handed draw and secure retention 360 degree rotation with 12 locking angles for hands-free lighting PA66 nylon and glass fibre, 93g, 25 percent lighter than the NTH25 Rides on 38 to 50mm duty belts and MOLLE, with an adjustable stopper Rated for use from -40 to 55 degrees Celsius Draw and reholster in one motion Dual-sided guide rollers line the light into the holster so it seats cleanly every time, whether you are drawing at a vehicle stop or dropping it back on the move. The side lever locks the light in place until you choose to release it, so a foot chase or a bend at the boot leaves it exactly where you put it. Built around the P-series duty lights The NTH29 is shaped for the Nitecore P27iX, P20iX, P23i and P20i UV, so your patrol light drops straight in and sits secure. Any of these lights with a head of 31.8 to 34mm and a tube of 25.4 to 26mm fits correctly, and the adjustable stopper fine-tunes the depth to your exact light. Point the beam and keep your hands free The holster rotates a full 360 degrees and locks at 12 angles, so you can aim the light while it stays on your belt. Angle it forward for a search, down for paperwork at the boot, or up onto a panel during an inspection, all with both hands free for the task. Rides where your kit already lives The mount fits duty belts from 38 to 50mm and clips onto MOLLE webbing, so it sits on a full patrol rig or a plain leather belt just as easily. An adjustable screw stopper sets the holster firm at the height and position you want, so it stays put through a long shift. Light on the belt, built for the field Moulded from PA66 nylon and glass fibre, the NTH29 weighs 93g, a quarter lighter than the NTH25 it follows, so it earns its place on a loaded belt. The same build shrugs off heavy daily use and holds up from -40 to 55 degrees Celsius, from a cold night watch to a hot vehicle cabin. WHY THE NTH29 OVER AN ORDINARY POUCH Locked, not just wedged in A side-lever lock retains the light until you release it, where an open pouch relies on friction and can let a light bounce loose. Draws clean every time Dual-sided guide rollers smooth the draw and the reholster, so the light does not snag the way it can in a tight fabric sleeve. Hands-free at any angle 360 degrees of rotation and 12 locking angles point the beam where you need it, where a fixed pouch only carries the light. Light and weatherproof-tough PA66 and glass fibre at 93g take a -40 to 55 degree range, lighter to carry than a leather rig and steadier than thin plastic. WHO IT'S BUILT FOR Law Enforcement & Security Instant, retained access to your light on the duty belt during patrol, a vehicle stop or a perimeter sweep. Tactical & EDC Carry your P-series light on a normal 38 to 50mm belt, drawn one-handed and dropped back in by feel. Outdoor & Utility Work Rotate the light to any angle for hands-free lighting during inspections, repairs and night work. COMPATIBLE FLASHLIGHTS Compatible models P27iX, P20iX, P23i, P20i UV Head diameter 31.8 to 34mm (1.25 to 1.34") Tube diameter 25.4 to 26mm (1.00 to 1.02") Depth adjustment Adjustable screw stopper SPECIFICATIONS Material PA66 nylon and glass fibre Dimensions 108 x 50 x 69mm (4.25 x 1.97 x 2.72") Weight 93g (3.28 oz) Belt compatibility 38 to 50mm (1.50 to 1.97") Mounting Belt loop and MOLLE Rotation 360 degrees, 12 locking angles Operating temperature -40 to 55 degrees Celsius FREQUENTLY ASKED QUESTIONS Which flashlights fit the NTH29? It is built for the Nitecore P27iX, P20iX, P23i and P20i UV. Any of these lights, with a head of 31.8 to 34mm and a tube of 25.4 to 26mm, seats correctly, and the adjustable stopper sets the depth to your exact light. How does it attach to my belt or pack? The mount fits belts from 38 to 50mm and clips onto MOLLE webbing, so it rides on a duty rig or a plain belt. The screw stopper locks it firm at the height and angle you set. Will the light stay put if I run or bend down? The side-lever lock holds the light in the holster until you release it, and the guide rollers keep the seat snug, so it stays put through movement and only comes out when you draw it. What's In The Box 1x NTH29 Tactical Flashlight Holster - side-lever lock, 360 degree rotation, belt and MOLLE mount Keep your duty light fast to reach and locked in place. GET YOUR NTH29 HOLSTER NOW