Reinforced Rear Rack for BMW R 1200 GS and R 1250 GS | top case support, enlarged version

Reinforced rear rack for BMW R 1200 GS and R 1250 GS Code JP071WPRO, which LOBOO calls the enlarged version of its Top Case Rack. It replaces the rear rack area with its own structure — a tubular subframe plus mounting plate — and supports the top case without transferring the weight to the original plastic parts. Which motorcycles it fits BMW R 1200 GS from 2013 BMW R 1200 GS Adventure from 2014 BMW R 1250 GS from 2019 BMW R 1250 GS Adventure from 2019 The “40 Years GS” editions of the R 1250 GS and R 1250 GS Adventure Which top cases you can fit The plate has mounting points prepared for P45T, P36T, T36T and C40T, namely the top cases in the PIKE TRACKER, TIBET and CONQUEROR series. The top case is not included. What's in the box Nine line items: the tubular subframe, the mounting plate, four ø20 × ø8.5 × 13 mm spacers, two ø18 × ø8.5 × 10 mm spacers, four M6×30 screws, two M8×30 screws, two M8×35 screws, four M8 washers and the mounting tool. Tightening torques Two values not to be confused: 10 N·m for the M6 screws and 20 N·m for all M8 screws. The manual requires fitting all the parts without tightening, making the adjustments, and tightening only at the end, in sequence. Installation Four steps. Remove the original screws from the rear area, install the tubular subframe with the M8 screws and spacers, then install the plate with the M6 screws. No drilling or permanent modification is required.