SHIMISPART Rapid Protective Coating

SHIMISPART™ Rapid Protective Coating is a high performance, moisture tolerant, structural polyaspartic coating for fast, reliable surface protection. It is a two component, 100% solids clear resin that hardens in about half an hour at 25°C, giving a smooth, seamless, hard wearing finish that can be returned to service the same day. The same resin forms the basis of SHIMISPART Rapid Repair: where a trowellable mortar is needed rather than a coating, Super Ceramic filler can be added to produce a paste of the required consistency. Typical Uses Rapid cure protective coating for concrete floors and prepared substrates Seal and build coat where a fast return to service is required Protective coating over repaired or patched areas Binder for decorative and slip resistant broadcast materials Plant rooms, workshops, warehouses and trafficked areas Kit Sizes Mini 1.25 Lt: 0.75 Lt Part A resin + 0.5 Lt Part B hardener Small 2.5 Lt: 1.5 Lt Part A resin + 1 Lt Part B hardener Medium 5 Lt: 3 Lt Part A resin + 2 Lt Part B hardener Large 7.5 Lt: 4.5 Lt Part A resin + 3 Lt Part B hardener XL 12.5 Lt: 7.5 Lt Part A resin + 5 Lt Part B hardener XXL 25 Lt: 15 Lt Part A resin + 10 Lt Part B hardener Key Features Rapid cure: tack free in 15 minutes at 25°C, ready to grind in about 30 minutes, recoat after 1 hour 100% solids: no solvent, no VOC and no shrinkage on cure Moisture tolerant: tolerates damp substrates with no standing water Smooth seamless finish: self levelling on horizontal surfaces, clear, hygienic and easily cleaned Tintable and decorative: accepts SHIMICOAT tints, metallics, flake and glitter Strong: coating strength typically greater than 50 MPa when fully cured Coverage is approximately 0.2 Lt per square metre per coat, around 5 square metres per litre. All polyaspartic coatings may yellow slightly over time: overcoat with SHIMISPART Topcoat UV Shield where long term colour stability outdoors is required. Full application detail is in the Technical Data Sheet under Downloads & Guides below.