12V 460Ah Epoch V2-T Elite Series Battery - 5.9kWh Heated & Bluetooth & Victron Comms LiFePO4

12V 460Ah Epoch V2-T Elite Series Battery - 5.9kWh Heated & Bluetooth & Victron Comms LiFePO4 Features Integrated 400A EATON Class T Fuse enhances safety, reduces wiring complexity, and ensures compliance with ABYC standards Premium LiFePO4 Chemistry 460Ah Capacity Built-in Smart Battery Management System (BMS) VICTRON communications with distributed charge control via DVCC (plug-and-play setup) IP67 Rated – dustproof and waterproof Internal self-heating for charging below 0°C Bluetooth monitoring via iOS & Android apps Parallel support for up to 16 batteries External power button & battery gauge included Overcharge & over-discharge protection Over-current & short-circuit protection High & low temperature disconnects UL60691 Certified Internal Fuse UL1642, UL9540A, IEC 62619:2022 Certified Cells UL1973 Certified Pack 4000+ cycle life Maintenance-free operation 11-Year Manufacturer Warranty Configuration Cell Configuration: 4S2P Chemistry: LiFePO4 Current Specifications Capacity: 460Ah Max Continuous Discharge: 230A @ 25°C Max Continuous Charge: 210A @ 25°C Peak Discharge Current: 500A (30 Seconds), 1300A (1 Second) Series / Parallel Configuration: Max (4) in Series Max (16) in Parallel 4S1P or 1S16P Voltage Specifications Nominal Voltage: 12.8V Max Charge Voltage: 14.6V Operating Voltage Range: 10.0V – 14.6V Temperature Specifications Charge Temperature Range: -30°C to 55°C (with self-heating) Discharge Temperature Range: -20°C to 55°C Storage Temperature: 0°C to 35°C Physical Specifications Weight: 97 lbs Length: 20.75" Width: 8.5" Height: 12" Certifications UL1973 RoHS CE Recommended Charging Settings (Non-Victron Systems) Absorption Voltage: 14.2V Absorption Time: 15 minutes per battery Float Voltage: 13.5V Equalization: OFF Temperature Compensation: Disabled Victron System Setup Supports Victron DVCC distributed charge control Plug waterproof bung into master blue port Connect RJ45 cable from master black port to slave battery blue port Daisy chain additional batteries up to 16 in parallel Set DIP switches according to manual Connect grey RJ45 plug into Cerbo / Ekrano GX BMS CAN port For Cerbo MK2 systems use VE-CAN1 or VE-CAN2 set to 500 KBPS LV Enable DVCC and set controlling BMS & battery monitor to Epoch Verify installed battery modules and Ah capacity on GX display System will automatically manage charging profile: 14.2V absorption ~15 minutes absorption per battery 13.5V float voltage Important Note It is recommended to manually program Multiplus, Quattro, and all additional charging sources with the same charging parameters in the event of CAN communication loss.