Clack WS2 CI Noryl Metered Softener Valve Kit – No Screen, Injector or DLFC

Clack WS2 CI Noryl Metered Softener Valve KitThe Clack WS2 CI is a heavy-duty 2" top-mount control valve designed for commercial and industrial water softening applications. This metered softener valve kit is supplied with valve, transformer, tails and meter, and is supplied without screen, injector or DLFC so these items can be selected separately to suit the application.The glass-filled composite valve body provides a robust, corrosion-resistant construction, while the CI electronic controller provides fully programmable regeneration with metered operation based on water usage.Key Features 2" commercial/industrial top-mount control valve Noryl / glass-filled composite valve body Metered softener configuration Supplied with meter Up to 9 programmable regeneration cycles Programmable regeneration cycle times 24-hour clock with solid-state microprocessor controller Reliable DC drive with linearly reciprocating piston One-piece expanding seal and spacer stack assembly Suitable for softener vessels from 12" to 36" diameter Supplied with valve, transformer, tails and meter No screen, injector or DLFC included Flow Rates Service flow: up to 21.6 m³/hr at 1 bar pressure drop Backwash flow: up to 19.3 m³/hr at 1.7 bar pressure drop Meter Specification Accuracy: ±5% Flow range: 5.7–568 lpm Volume range: 0.02–5,700 m³ Totalizer: 1–99,999 m³ Technical Specification Inlet / outlet: 2" connections Tank mounting thread: 4" - 8 UN Riser / distributor tube: 50 mm OD Operating pressure: 1.4–8.6 bar Operating temperature: 4–43°C Drain connection: 2" male BSPT 90° QC elbow Power supply: 100–240 VAC, 50/60 Hz input; 15 VDC output Height above tank: approximately 317.5 mm Shipping weight: approximately 4.98 kg Programmable CyclesThe WS2 CI controller can be configured with up to nine regeneration stages in the required sequence, with programmable backwash, rinse, brine, refill and pause/service functions.Please note: this version is supplied without screen, injector or DLFC. These components should be selected separately according to the softener vessel size, resin quantity and required regeneration conditions.