Tripp Lite NGI-M08C2 8-Port Managed Industrial Gigabit Ethernet Switch - 10/100/1000 Mbps, 2 GbE SFP Slots, -40° to 75°C, DIN Mount

8 auto-negotiable RJ45 and 2 GbE SFP ports connect devices over a LAN RJ45 ports can be repurposed as a console port for access to command line interface Industrial-grade switch supports operating temperature range of -40° to 75°C Easy-to-read LEDs indicate connection and activity status for each port CLI or web management allows monitoring and control of each connected device 8-Port Managed Gigabit Ethernet Switch Connects Your Network Devices to a LAN This space-saving switch transmits data over a Gigabit Ethernet network. Eight auto-negotiating 10/100/1000 Mbps ports send data via Cat5e/6/6a cable only to the devices designated to receive it, which improves the efficiency and potential throughput of the network. The NGI-M08C2 also features two GbE SFP slots for uplinking data to other switches via optical fiber or copper. LEDs indicate when the switch is powered on and which Ethernet ports are showing activity. Protective Metal Housing Built to Last in Harsh Environments The compact NGI-M08C2 adds 10/100/1000 Mbps Gigabit Ethernet capacity to industrial automation, government, military, oil and gas, mining and outdoor applications, as well as other environments with space constraints and wide temperature ranges. The IP30 industrial-grade aluminum case withstands vibration, shock and free fall. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). Monitors and Controls Devices via CLI and Web Configuration The NGI-M08C2 supports MAC address auto-learning and auto-aging for efficient routing, as well as automatic MDI/MDI-X crossover detection for plug-and-play functionality. It also supports QoS, IGMP snooping, SFP DDMI and other device management features that fulfill the needs of high-performance managed industrial networks. IEEE 802.3x flow control allows smooth transmission of large files. Works with the Most Popular Web Browsers The NGI-M08C2 is browser-based and works independently from the connected computer's operating system. Because switch compatibility is based on common hardware standards, rather than system software dependencies, the NGI-M08C2 accommodates most platforms. Preferred web browsers include Google Chrome (on both Windows and macOS) and Microsoft Edge (Windows only). Pre-Installed DIN Rail Clip Allows for Convenient Installation The device may be DIN mounted using the pre-installed rail clip, which mounts firmly to any standard 35 mm DIN rail. Providing seamless operation in the event of power dips or failures, the switch features redundant 6-pin 24–48VDC terminal block power inputs to help prevent unnecessary downtime. When used with two power sources, the switch also supports alarm relay contacts that you can wire to your existing alarm circuit to notify you instantly when a power disruption occurs. TAA-Compliant for GSA Schedule Purchases The NGI-M08C2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Management features Switch type Managed Ports & interfaces Basic switching RJ-45 Ethernet ports quantity 8 Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000) SFP module slots quantity 2 Power connector Terminal block (6-pin) Network Networking standards IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support No Copper ethernet cabling technology 10BASE-T, 100BASE-T, 1000BASE-T Full duplex Yes Broadcast storm control Yes Ethernet LAN data rates 10,100,1000 Mbit/s MAC address auto-learning supported Yes Auto-negotiation Yes Auto MDI/MDI-X Yes Optical fiber Fiber ethernet cabling technology 100BASE-FX, 1000Base-X Data transmission MAC address table 8000 entries Switching capacity 12 Gbit/s Jumbo frames support Yes Jumbo frames 10000 Security DHCP features DHCP snooping Security algorithms SNMP Design Product colour Black Housing material Aluminium Reset button Yes LED indicators Yes DIN rail mounting Yes Power Power supply included Yes DC input voltage 20 - 48 V Input current 0.4 A Power consumption (typical) 11 W Power over Ethernet (PoE) Power over Ethernet (PoE) No Operational conditions Operating temperature (T-T) -40 - 75 °C Storage temperature (T-T) -40 - 85 °C Operating relative humidity (H-H) 5 - 95% Storage relative humidity (H-H) 5 - 95% Operating altitude 0 - 2000 m Weight & dimensions Width 50 mm Depth 116.1 mm Height 100.1 mm Weight 560 g Packaging data Package width 232.9 mm Package depth 182.9 mm Package height 62 mm Package weight 700 g Certificates Compliance certificates CE, REACH, RoHS Certification FCC, TAA Technical details Master (outer) case GTIN (EAN/UPC) 10037332266603 Logistics data Country of origin Taiwan Master (outer) case width 344.9 mm Master (outer) case length 389.9 mm Master (outer) case height 260.1 mm Harmonized System (HS) code 8517.62.0020 Master (outer) case gross weight 7.76 kg Products per master (outer) case 10 pc(s) leaflet