42mm × 35mm × 35mm End Feed Reducing Tee (Reduced End & Branch) — Copper

The 42mm × 35mm × 35mm End Feed Reducing Tee connects 42mm and 35mm in line (the run) with a 35mm branch at 90°. A reduced end-and-branch tee — off the 42mm inlet, one run end steps down to 35mm and the branch is a reduced 35mm. Soldered capillary joints on all three ends. Manufactured to BS EN 1254-1 and fits copper tube to BS EN 1057. This is a reduced end-and-branch tee — a run end (35mm) and the branch (35mm) are both reduced from the 42mm end. Also known as: reducing tee, end and branch reduced tee, double reducing tee, unequal tee, 42x35x35 tee, endfeed reducing tee. Manufactured to BS EN 1254-1 for capillary (solder) fittings Reduced end-and-branch tee — 42mm × 35mm × 35mm Fits copper tube to BS EN 1057 WRAS approved Solder and flux required — not supplied Sold individually — buy exactly what the job needs Suitable for hot and cold water and heating services End feed means a capillary joint: clean the tube and fitting, apply flux, heat evenly and feed lead-free solder to the mouth of the fitting until a ring forms. See our guide: How to solder end feed fittings. Also in this range: equal tees, couplers and the full end feed range. Ordering for a whole job? Use the bulk fittings matrix.