Flowmaster Force II Cat-back Exhaust System

Our Force II® line of exhaust systems are engineered as our quietest offerings, but will wake up your vehicles sound and power over the factory O.E. exhaust. You can generally expect a noticeable sound increase with a deep performance tone outside the vehicle, yet minimal interior drone in the cab area while cruising down the road enjoying all the performance benefits you've come to expect from Flowmaster®. This bolt-on emissions-legal cat-back system features full stainless steel construction, uses the factory hanger locations, 50 Series HD™ performance muffler with large 4.00-inch internals and dual 3.00-inch mandrel bent tailpipes offering two tailpipe exits in one kit. Choose your tailpipe exit either located under the rear bumper for an aggressive dual exhaust look, or exiting out the sides behind the rear tires to prevent blowing exhaust on your boat or trailer when towing. The system is finished off with a pair of large 4.00-inch polished logo embossed stainless steel tips for a modern look and includes instructions and all necessary hardware for an easy at home installation. Note: Fits 2/4 wheel drive and all wheelbases. Flowmaster Force II Cat-back Exhaust System Specifications: Brand Flowmaster California Proposition 65 Yes California Proposition 65 Chemical Name Nickel (Metallic) California Proposition 65 Chemical Name Chromium (hexavalent compounds) CARB (California) Compliant Yes 2874 0 Category Exhaust 3728 Flat Band 1882 Yes Emission Code 5 Exhaust Series Force II 11205 Silver 9874 Clamp-On 9876 Angled 1162 4.00 9877 Angle Cut 1163 Polished 9881 No 10104 13.00 1164 304 Stainless Steel 1161 2 9878 No 10980 Round 9875 Double Wall 9870 Dual Out Side 9870 Dual Out Rear 200 Natural 353 No 3390 Performance 4364 Yes Heat Shield Included No 596 Clamp-On Mount Type Uses Factory Hangers 92 Yes 9884 5.00 1892 18.00 4372 409 Stainless Steel 4373 Oval Muffler Color Black 9882 Black High-Temperature Paint Finish 4367 No 4368 No Muffler Included Yes 9962 Slip-Fit 4365 3.00 Muffler Inlet Location Center 4366 3.13 9963 Slip-Fit Muffler Outlet Diameter 3.00 Muffler Outlet Location Dual 4375 2 Muffler Overall Length 24.00 Muffler Part Number Kit Only 4374 1 Muffler Series 50 Series HD 1174 Reflection part type Exhaust System 3530 409 Stainless Steel Product Type Exhaust System Sound Level Moderate 4377 No Sub Category Exhaust and Tail Pipes 4369 3.00 4376 2 Tail Pipe Quantity Dual 4370 No Tip Logo Embossed 9871 3.00 26 Cat-Back 6014 No 2126 Not Applicable Warning California Proposition 65 Pipe Color Silver 9885 10.00 11906 No Description_ABR SYS 17-25 SU Description_SHO SYS 17-25 SUPERDUTY Description_INV 1725 SUPERDUTY 62L68L73L FII DUAL Description_ASC 2017-2026 Ford F-250 Super Duty and F-350 Super Duty with 6.2L, 6.8L and 7.3L engines. Fits 2/4 wheel drive and all wheelbases. Does not fit models with the Tremor package or models with a fifth wheel setup. Description_DES Flowmaster Force II Cat-back Exhaust System Description_EXT Fits 2017-2026 Ford F-250/F-350 Super Duty with 6.2L, 6.8L and 7.3L engines. - Moderate sound Description_MKT Our Force II® line of exhaust systems are engineered as our quietest offerings, but will wake up your vehicles sound and power over the factory O.E. exhaust. You can generally expect a noticeable sound increase with a deep performance tone outside the vehicle, yet minimal interior drone in the cab area while cruising down the road enjoying all the performance benefits you've come to expect from Flowmaster®. This bolt-on emissions-legal cat-back system features full stainless steel construction, uses the factory hanger locations, 50 Series HD™ performance muffler with large 4.00-inch internals and dual 3.00-inch mandrel bent tailpipes offering two tailpipe exits in one kit. Choose your tailpipe exit either located under the rear bumper for an aggressive dual exhaust look, or exiting out the sides behind the rear tires to prevent blowing exhaust on your boat or trailer when towing. The system is finished off with a pair of large 4.00-inch polished logo embossed stainless steel tips for a modern look and includes instructions and all necessary hardware for an easy at home installation. Note: Fits 2/4 wheel drive and all wheelbases. Description_FAB Moderate Exterior Sound with Mild Interior Sound Large 4.00-inch Polished 304 Stainless Steel Tips Dyno-Tuned for Maximum Performance Mandrel-bent Stainless Steel Tubing Uses the Factory Hanger Locations 409S Stainless Steel Construction 50 Series HD Performance Muffler Retains Factory Resonators Lifetime Limited Warranty Flowmaster Quality Easy Installation