DS18 ZXI-694 ZXi 6x9" 2-Way Coaxial Speakers with Kevlar Cone - 120W RMS 4-Ohm

DS18 ZXI-694 ZXi 6x9" 2-Way Coaxial Speakers with Kevlar Cone | 120W RMS 4-Ohm The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-694 is a 6x9", 4 ohm coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2-way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember. Features Power Handling: 120W RMS / 360W max gives you plenty of headroom for loud, clean playback. High Sensitivity: 92dB sensitivity means it gets very loud with modest amplifier power, ideal for pro audio and loud systems. Frequency Response: 31.5Hz-20KHz for full, balanced sound across its intended range. Barium Ferrite Magnet: A strong motor structure keeps the cone under control for tight, accurate output. Voice Coil: 1.2" / 30.4mm EISV voice coil on a KSV former handles heat and power for long listening sessions. Cone Material: Glass fiber cone is stiff and lightweight for accurate, low-distortion sound. Surround: Rubber surround allows controlled cone movement and long-term durability. Tweeter / Driver: PEI diaphragm delivers crisp, detailed highs. Long Excursion: Xmax of 3.3mm lets the cone move more air for deeper bass. Rigid Basket: Steel basket keeps the moving parts aligned under high power. Recommended High-Pass: Use a 50Hz high-pass filter to protect the speaker and get the cleanest output. The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look. 6x9" inch 2 way 4 ohm speaker requiring 120w RMS and 360w max power handling that gives amazing sound from low to extremely high volume. 2-way design will be sure to give you a full range of frequencies for an amazing audio experience to remember. Highlights 6X9" 2-Way Coaxial MAX Power: 360 Watts RMS Power: 120 Watts Impedance: 4 Ohm Barium Ferrite & Neodymium Magnets Pair ~ 92dB Specifications General Nominal Diameter: 6X9" / 162*235mm Nominal Impedance: 4 ohm RMS Power Handing: 120W MAX Power Handing: 360W Sensitivity (1w/1m): 92dB Frequency Response: 31.5Hz-20KHz Recommended HI Pass Crossover: 50Hz Number of ways: 2-Way Midrange Voice Coil Diameter: 1.2" / 30.4mm Voice Coil Former Material: KSV Winding Material: EISV Cone Material: Glass fiber Surround Material: Rubber Basket Material: Steel Magnet Material: Barium Ferrite Magnet Weight: 550g Tweeter Nominal Diameter: 1" (25.4mm) Voice Coil Diameter: 0.8"(20.4mm) Voice Coil Former Material: KSV Winding Material: EISVM Diaphragm Material: PEI Magnet Material: Neodymium Magnet Weight: 8.5g Thiele & Small Parameters Equivalent Volume Vas: 17.52L Excursion (one way) Xmax: 3.3mm Free Air Resonance Fs: 58Hz Mechanical Factor Qms: 5.77 Electrical Factor Qes: 1.18 Total Factor Qts: 0.98 Mechanical Mass Mms: 23.44g Mechanical Compliance Cms: 286mm/N BL Factor Bl: 5.18 Voice Coil Inductance Le: 178mH Cone Area Sd: 207.7cm2 DC Resistance Re: 3.5 ohm Mechanical Mass w/o air Mmd: 20g Measurements Overall Diameter: 6.37X9.25" / 162*235mm Overall Depth: 3.66" / 93mm Front Mount Baffle Cutout: 5.94x8.70" / 151*221mm Mouting Depth: 3.22" / 82mm Motor Diameter: 4.09" / 104mm Professional Installation Want it installed? Car Toys installers can design and install a complete DS18 system around your vehicle. Stop by a store or book an appointment.