Major Science 10L Touchscreen Stirring Water Bath | SWB-10LT Series

MAJOR SCIENCE · SWB-10LT Heating and mixing, clearly in view. Bring bath-water agitation and solution mixing together in the Major Science SWB-10LT series. A built-in magnetic stirring system works alongside digital temperature control in a 10L, 304 stainless steel tank. The 4.3-inch color touchscreen displays temperature and timer simultaneously. Choose the stirring-mechanism count that suits your vessels, then select timed operation up to 9999 minutes or continuous operation. Exact 10L LT-family manufacturer photograph with lid shown. Glassware/liquid are not included; verify current package contents. Displayed settings are illustrative. 4.3-inch touchscreen Temperature and timer shown together. 1 or 2 stirrers Choose the mechanism count for the vessel layout. 110 V or 220 V Separate rated versions, both 50/60Hz; not universal-input power. Choose the electrical version and stirring count Use the product options above to select Voltage and Stirring positions. Each combination has its own catalog number. Match the voltage to the installation before ordering. Catalog no. Configuration SWB-10LT-1-110 110V, 50/60Hz; 1 stirring mechanism SWB-10LT-1-220 220V, 50/60Hz; 1 stirring mechanism SWB-10LT-2-110 110V, 50/60Hz; 2 stirring mechanisms SWB-10LT-2-220 220V, 50/60Hz; 2 stirring mechanisms Choose one stirring mechanism or 2 SWB-10LT-1 has one stirring mechanism. SWB-10LT-2 provides 2 for compatible vessels positioned over the magnetic drives. Both models share 600W power and the same 10L tank dimensions. Vessel footprint and alignment matter as well as the number of stirring positions. SWB-10LT-2 demonstration with two vessels; vessels, liquid and stir-bar contents are not inferred from the photo. Shared current LT touchscreen detail. Displayed values illustrate the interface, not a prescribed protocol or rated maximum. Follow temperature and time together The 4.3-inch color touchscreen keeps temperature and timing information together. Digital microprocessor control manages the bath while you monitor the run. Set timed operation up to 9999 minutes or select continuous operation. User temperature calibration is supported. Control heat and encourage even bath temperature The specified temperature-control range runs from 5°C above ambient to 99°C, with 0.1°C increments. Temperature uniformity is specified as ±0.2°C at 37°C. Built-in magnetic stirring agitates the bath water and supports solution mixing. The stated stirring-speed range is 400 to 1500 rpm; select conditions appropriate for your vessels and liquids. Manufacturer current-LT-page schematic. Bath-water circulation and magnetic mixing inside a suitable vessel are distinct functions. Same-scale interior bounding dimensions, not a measured vessel-placement or stirrer-spacing template. Both interiors are 150 mm deep. Plan the vessel layout The bath interior measures 240 × 300 × 150 mm. For water-bath loading without simultaneous stirring at every vessel, the manufacturer gives reference chamber capacities of 6 × 250 mL flasks or 4 × 500 mL flasks. These loading examples are not stirring-position counts or a guarantee of fit. Check vessel base diameter, height, drive alignment and lid clearance before arranging your samples. Allow space for access and routine operation The unit measures 255 × 355 × 240 mm without its lid and weighs approximately 9 kg. Allow additional clearance above the bath for your vessels and lid access. The manufacturer describes a concave lid design that returns condensation to the tank and a side opening intended to limit evaporation. On-screen warning indication and automatic shutdown are specified safety features. Manufacturer lid-condensation illustration, as shown on the current LT page. Manufacturer lid side-opening illustration. Confirm the selected lid/package separately. Match the electrical version and logging options The SWB-10LT family has separate 110V and 220V order codes, each rated 50/60Hz. Select one or 2 stirring mechanisms independently of voltage; a -110 unit is not a universal 110–220V model. Data logging is available through separately listed accessories: the SWB-RS232 cable, SWB-DLSW software package, or SWB-DLSW-R software package with an RS232 cable. Confirm software requirements and regional power-cord details before ordering.Chamber capacity is not the stirring-position count The manufacturer's current brochure gives reference water-bath loading examples of 6 × 250 mL or 4 × 500 mL flasks. These illustrate chamber capacity only, not simultaneous magnetic stirring at every flask. For active stirring, start with the selected one- or 2-mechanism model, then check vessel footprint, height, drive alignment and lid clearance. Nominal flask volume alone does not establish fit. No fixed center-to-center spacing or universal vessel-brand fit is claimed.What is supplied, and what is optional? This listing identifies the selected SWB-10LT water bath. Current LT ordering information does not give a complete packing list, so do not assume lid, loose stir bars, racks, glassware, a regional power cord or logging accessories from photographs alone. SWB-RS232 is a separately listed logging cable. SWB-DLSW is the software package; SWB-DLSW-R combines software with an RS232 cable. Confirm current package contents and software requirements before ordering.10L or 20L: compare usable bath space SWB-10LT · 10L 240 × 300 × 150 mm interior; 600W; one or two stirring mechanisms; body 255 × 355 × 240 mm without lid. SWB-20LT · 20L 300 × 500 × 150 mm interior; 800W; one or three stirring mechanisms; body 330 × 540 × 240 mm without lid. SWB-10LT buyer questions How do SWB-10LT-1 and SWB-10LT-2 differ?SWB-10LT-1 has one stirring mechanism; SWB-10LT-2 has 2. They share the 10L tank, 600W power rating and 4.3-inch color touchscreen.Can all reference-loaded flasks be stirred at once in SWB-10LT?No. The reference loading of 6 × 250 mL flasks describes chamber capacity for water-bath use, not simultaneous magnetic stirring. This family has one or 2 stirring mechanisms, depending on the model.Will my vessels fit the SWB-10LT bath?Compare vessel dimensions with the 240 × 300 × 150 mm bath interior and allow clearance for the lid. Nominal vessel volume alone does not establish fit or alignment with a magnetic drive.Can SWB-10LT cool below room temperature?Its specified operating range begins 5°C above ambient. It is not specified for below-ambient temperature control.Does the SWB-10LT ±0.2°C specification mean accuracy or uniformity?The current manufacturer table specifies temperature uniformity of ±0.2°C at 37°C. Uniformity describes temperature consistency across the bath; it is not the same as accuracy relative to a temperature reference.How long can I set the SWB-10LT timer?The current LT models specify a 9999-minute timer or continuous operation, with temperature and timer displayed together on the touchscreen.Does SWB-10LT include logging software and the RS232 cable?The manufacturer lists the RS232 cable and logging software as accessories. The SWB-DLSW-R package combines software with an RS232 cable; do not assume those options are supplied with the bath.Does SWB-10LT include a lid, stir bars, racks and glassware?The current LT information illustrates a lid and vessels but does not provide a complete packing list. Confirm the lid and any required stir bars, racks, glassware and regional power cord with the supplier before ordering.