Sundance Temperature Sensor ASSY WATER TEMP,3 PIN (751)

Type of Product: Sundance Temperature Sensor ASSY WATER TEMP,3 PIN Manufacturer: Sundance Connections: Extended Tip temperature sensor / 3-Pin Connector / 2-Wire Does not include O-Ring part #6540-228 The Temperature Sensor usually mounts into the wall of the Spa. The boxed end plugs into mounts on to the PCB. Dimensions: Diameter: 20 mmCable Length: 3.5 m Commonly Used With: 6600-751 Sundance/Jacuzzi Temperature Sensor with 3 Pin Connector Works with the following Sundance® Spas: 2018-07/29/2021 680 Series 04/2017-07/29/2021 780 Series 10/2016-07/29/2021 980 Claremont/Kingston 2016-07/29/2021 880 Series 2019-03/2021 980 Lisbon/Odessa 03/2018-03/2021 880 Cambria 2019-07/29/2021 680 Alicia 2018-2020 680 Prado5 and Tacoma 04/2017-03/2021 780 Hanover Works with the following Jacuzzi® Hot Tubs: A. 2015+ J-500 Series B. 09/2015+ J-400 Series C. 2016+ J-300 Series D. 2018+ J-200 Series E. 2018+ J-100 Series 6540-228 O-ring purchased separately (not shown) Additional Notes: There are 2 main Temperature sensors used with Sundance they look the same but there are 2 different types of connections be sure to choose the correct one. For the vast majority of Sundance and Jacuzzi models, you can safely use the 6600-551 to replace a faulty 6600-751. However, there is a major exception to this rule: [1, 2] The Exception: The 6600-551 cannot be used on 2016 to July 2021 Jacuzzi J-325, J-355, and J-365 models. The Fix: If you own one of those specific mid-generation J-300 series models, you must strictly buy and install the 6600-751 sensor.