Epson i3200-A1 DTF Maintenance Kit

The Epson i3200-A1 DTF Maintenance Kit is a complete printhead replacement bundle for DTF (Direct-to-Film) printers — containing 1 genuine original Epson i3200-A1 water-based printhead, 4 replacement 14-pin data cables, and 4 compatible ink dampers. Designed for professional DTF service technicians and production shop owners who need to replace their i3200-A1 printhead correctly the first time, this kit eliminates the most common cause of premature DTF head failure: installing a new printhead on worn cables and dampers. Compatible with the majority of production DTF printers including Fedar, Oric, Yuxunda, Potry, Sinocolor, and ColDesi i3200-A1 platforms. What Is Included in the Kit Component Quantity Specification Epson i3200-A1 Printhead 1 Genuine original Epson — 3,200 nozzles, 600 dpi, PrecisionCore MicroTFP, water-based DTF/sublimation 14-Pin Data Cables 4 i3200-A1 / i1600 compatible flat flexible cable — 1 per nozzle row pair; replace at every head installation Ink Dampers 4 i3200-A1 compatible — 1 per ink channel (C, M, Y, K); EPDM seals for water-based DTF inks Epson i3200-A1 Printhead Technical Specifications Specification Detail Model Epson i3200-A1 Technology PrecisionCore MicroTFP (Micro Thin Film Piezo) Ink type Water-based — DTF, sublimation, textile, aqueous Total nozzles 3,200 (8 rows × 400 nozzles per row) Nozzle resolution 300 NPI per row / 600 NPI per 2 rows Effective print width 1.33 inches (33.8mm) Colour channels 4 (CMYK) — 4 manifold inputs, 2 nozzle rows per colour Dimensions 69.1 × 59.4 × 35.6mm Droplet performance Binary: 6pl at 43.2kHz / Greyscale: 3.8–9.4pl at 21.6kHz Country of origin Japan OEM status 100% genuine original Epson — not compatible, not refurbished Which DTF Printers Is This Kit Compatible With? This maintenance kit is compatible with all DTF printers using the Epson i3200-A1 printhead, including: Coldesi 24H2 DTF Coldesi 24H4 DTF ColDesi DTF Printers (i3200 Series) Fedar FD60 DTF Fedar FD65-2 DTF Fedar FD70 DTF Fedar FD5193EF DTF M&R QUATRO™ DTF Oric A-6202 Oric A-6203 Oric A-6204 Oric OR-A3 Mini330 DTF Oric OR-620 Pro Oric OR-6202 Oric OR-6203 Oric OR-6204 DTF Oric OR-7602 Oric OR-7604HT DTF Potry BC-0302X-HTO1 Potry HT-0604IA-01 Sinocolor DTF-400A Sinocolor WJ-240S Yuxunda DTF-300 Plus Yuxunda DTF-300 Pro Max Yuxunda DTF-400 Plus Yuxunda DTF-400 Pro Max Yuxunda DTF-600 Pro Max Not sure if this kit fits your printer? Contact us — our US-based support team will confirm compatibility before you order. Why Do i3200-A1 Data Cables Need Replacing With Every Head Change? The 14-pin flat flexible cables that connect the i3200-A1 printhead to the carriage board undergo approximately 50 million flex cycles per year in a production DTF environment. Each carriage pass — left and right — flexes the cable at its bend radius. Over time, this produces micro-fractures in the conductor traces invisible to the naked eye. These micro-fractures cause intermittent signal loss that manifests as random nozzle dropout, horizontal banding, and colour channel failure — symptoms identical to a failing printhead. A new i3200-A1 installed on cables with existing micro-fractures will show the same symptoms within days or weeks, leading technicians to incorrectly conclude the new head is also defective. The correct service protocol — confirmed by Epson service documentation and leading DTF repair specialists — is to replace all 4 cables simultaneously with every printhead. Why Do Ink Dampers Need Replacing at Every i3200-A1 Installation? DTF white ink contains titanium dioxide (TiO₂) pigment particles that are significantly more abrasive and prone to sedimentation than standard CMYK pigments. Over a production service life, TiO₂ particles score and degrade the EPDM seals inside the damper membranes, allowing micro-quantities of air to permeate into the ink supply — disrupting the negative back-pressure that the i3200-A1 requires for stable drop formation. Dampers that have been exposed to TiO₂ white ink for extended periods also accumulate pigment deposits on their internal filter screens, restricting ink flow and causing intermittent starvation that produces print quality degradation indistinguishable from nozzle clogging. Replacing dampers simultaneously with the printhead ensures the new head operates under the correct pressure conditions from the first print. Epson i3200-A1 vs XP600 — Which Is Right for Your DTF Printer? Specification Epson i3200-A1 (this kit) Epson XP600 / F1080 Total nozzles 3,200 1,080 Native resolution 600 dpi 1440 dpi (interpolated) Print width 33.8mm (1.33") 21.2mm (0.83") Data cables required 4 × 14-pin 2 × FFC cables Best for Production DTF — high volume, professional shops Entry-level and mid-volume DTF Price point Higher — production investment Lower — accessible entry How to Install the Epson i3200-A1 — Correct Service Order Follow this sequence for a correct i3200-A1 maintenance kit installation: Step 1 — Power off the printer and allow the carriage to return to the home position before opening the print bay. Step 2 — Remove the old printhead and immediately inspect the capping station and wiper blade. Replace the capping station if the cap top is worn or contaminated. Step 3 — Replace all 4 data cables. Label or photograph cable positions before removal. Install all 4 new 14-pin cables from this kit before seating the new printhead. Step 4 — Replace all 4 dampers. Fill new dampers with ink before installation to prevent air entry. Connect to manifold nipples by colour channel (C, M, Y, K). Step 5 — Install the new i3200-A1 printhead and secure. Perform an initial head flush using the printer's maintenance menu before running a nozzle check. Step 6 — Run a nozzle check pattern and confirm all 3,200 nozzles are firing correctly before resuming production. Allow the head 24–48 hours of normal operation for final nozzle stabilisation after installation. Why Buy from Digiprint USA • Complete i3200-A1 service kit — genuine printhead + 4 cables + 4 dampers in one shipment from Miami FL • 100% genuine original Epson i3200-A1 — 3,200 nozzles, 600 dpi, PrecisionCore MicroTFP, Japan-made • Eliminates the #1 cause of premature DTF head failure — worn cables and dampers at installation • In stock in Doral, Miami FL — same day shipping before 2PM EST • Compatible with all major production DTF platforms — Fedar, Oric, Yuxunda, ColDesi, Potry, Sinocolor • Ideal for Latin American DTF production operations and print shops using Miami freight forwarders Browse our full range of DTF printer parts and maintenance supplies including individual capping units, wiper blades, and cleaning solutions. View all genuine Epson printheads stocked by Digiprint USA. Frequently Asked Questions What is included in the Epson i3200-A1 DTF maintenance kit? The kit contains: 1 genuine original Epson i3200-A1 water-based printhead (3,200 nozzles, 600 dpi, PrecisionCore MicroTFP), 4 replacement 14-pin flat flexible data cables compatible with the i3200-A1 and i1600, and 4 ink dampers for the CMYK channels. This is the complete set of consumables required for a correct i3200-A1 printhead installation. Why should I replace the cables and dampers when installing a new i3200-A1 printhead? Old cables develop micro-fractures from repeated flex cycles that cause nozzle dropout identical to a failing printhead. Old dampers have degraded EPDM seals that disrupt the ink back-pressure the new head requires. Installing a new head on worn accessories produces the same failure symptoms within days. Replacing all three components simultaneously is the only correct service approach. How many nozzles does the Epson i3200-A1 have? The Epson i3200-A1 has 3,200 nozzles arranged in 8 rows of 400 nozzles each, achieving a native resolution of 600 dpi across 2 rows. This is approximately 3× the nozzle count of the XP600 (1,080 nozzles), enabling significantly higher print speeds and throughput in production DTF environments. Is this kit compatible with dual-head DTF printers? Each kit services one i3200-A1 printhead position — 1 head, 4 cables, 4 dampers. For dual-head DTF printers running 2× i3200-A1 heads simultaneously, order 2 kits. Contact us with your printer model to confirm the correct quantity before ordering — we will confirm the exact kit requirement for your specific machine. What is the difference between the i3200-A1 and the i3200-A1 HD? The i3200-A1 supports 4 colour channels (CMYK) with 4 manifold inputs, each colour using 2 nozzle rows. The i3200-A1 HD supports 8 colour channels with 8 manifold inputs, each colour using 1 nozzle row. Both have the same 3,200 nozzle count and physical dimensions but are not interchangeable — each printer can only use the type it was designed for. Do you ship i3200-A1 maintenance kits to Latin America? Yes — same day shipping from our Doral, Miami FL warehouse for orders placed before 2PM EST. Digiprint USA is located in Doral, the primary freight forwarder hub for Latin America, making us the closest US supplier to most Latin American DTF operations in Colombia, Mexico, Brazil, Peru, Chile, and the Caribbean.