MaxxECU GEN2 RACE, with LSU 5.2, flying lead install kit
MaxxECU GEN2 RACE, with connector kit The MaxxECU GEN2 RACE is a next-generation standalone engine management system designed for high-performance and motorsport applications. It supports up to 12 cylinders fully sequentially, dual wideband lambda, dual knock control, 16 injector outputs, 12 ignition/GP outputs, high-speed internal logging, Wi-Fi, Bluetooth and dual CAN communication. Specification: All 1–12 cylinder engines, 2-stroke or 4-stroke Up to 12 cylinders fully sequentially Up to 12 cylinders in wasted spark 8 pulse inputs supporting VR or Hall sensors 2 inputs with selectable 5V/12V sensor supply Selectable pull-ups on all pulse inputs 24 analog inputs with selectable pull-ups 8 Type-K EGT inputs Dual wideband lambda controllers Bosch LSU 5.2 Bosch LSU 4.9 Bosch LSU 4.2 2 knock sensor inputs 16 peak/hold injector outputs Supports high- and low-impedance injectors Can also be used as GP outputs 12 ignition / GP outputs Selectable +5V / +12V / Ground output 8 additional ground-switching GP outputs 4 additional +12V GP outputs Up to 5A according to MaxxECU's comparison chart 4 H-bridge / motor outputs Suitable for electronic throttle and other motor control 5A continuous / up to 15A maximum according to MaxxECU's comparison chart Built-in 550 kPa MAP sensor Supports approximately 4.5 bar / 65 PSI boost User-serviceable BSP 1/8 connection Built-in 3-axis accelerometer, up to 8G Dual CAN bus Built-in Wi-Fi Built-in Bluetooth Dual USB-C 480 Mbit/s PC/MTune connection 12 Mbit/s auxiliary/tablet connection and charging 16 GB internal logging memory Internal logging up to 1000 Hz Logging of 2000+ ECU channels Analog/digital input sampling up to 2000 Hz EGT sampling at 200 Hz Fuel and ignition calculations performed 3,000 times per second Ignition resolution: 0.1° Injector resolution: 0.001 ms Operating voltage: 6–22V IP68 waterproof Automotive-grade Superseal 1.0 connectors All inputs and outputs protected against overvoltage, reverse polarity and short circuits Dimensions: 240 × 138 × 35 mm, including protruding connectors Weight: approximately 700 g Products included 1 pcs 2423 – MaxxECU GEN2 RACE, unit only 1 pcs 2411 – MaxxECU GEN2 RACE box 1 pcs 2363 – MaxxECU GEN2 MAP sensor BSP 1/8 to AN3 nipple 1 pcs 2364 – MaxxECU GEN2 MAP sensor BSP 1/8 to hose nipple 2 pcs 2368 – MaxxECU GEN2 USB rubber USB-C cover 1 pcs 2288 – MaxxECU GEN2 RACE internal foam 1 pcs 2413 – MaxxECU GEN2 communication cable, USB-C to USB-A 1 pcs 2414 – MaxxECU GEN2 communication cable, USB-C to USB-C 1 pcs 2356 – MaxxECU GEN2 cable harness 1 1 pcs 2357 – MaxxECU GEN2 TRACK / RACE cable harness 2 1 pcs 2358 – MaxxECU GEN2 RACE cable harness 3 1 pcs 2359 – MaxxECU GEN2 RACE cable harness 4 1 pcs 2427 – MaxxECU GEN2 RACE quick guide and wiring diagram, printed 1 pcs 2335 – Bosch LSU 5.2 wideband lambda sensor, 0 258 037 010 1 pcs 1533 – 6-way socket housing for LSU 4.9 / 5.2 wideband sensor 1 pcs 2412 – MaxxECU GEN2 Bluetooth / Wi-Fi antenna 2 pcs 1235 – MaxxECU sticker