2021-2023 BMW G8X M3/M4 ADRO Front Face V2 Conversion | Painted to Match, Ready to Install

2021-2023 BMW G8X M3/M4 ADRO Front Face V2 Conversion | Painted to Match, Ready to Install Transform your 2021-2023 BMW M3 (G80) or M4 (G82) with an authentic ADRO Front Face V2 conversion, professionally Painted to Match by ReveMoto and delivered Ready to Install. Replace the factory front-end appearance with ADRO's Front Face V2 design - the ADRO Front Bumper V2 paired with its exclusively-matched ADRO Carbon Fiber Front Lip V2. This aftermarket M3/M4 front face conversion combines authentic ADRO components with ReveMoto's professional paint-to-match service, so your bumper and front lip arrive professionally finished and ready for installation. ADRO's V2 bumper brings more defined air intakes and a wider, lower appearance, paired with a matching V2 carbon fiber lip shaped to its lines. This is an aftermarket ADRO styling conversion and is not an OEM BMW factory facelift package. ADRO supplies the bumper unpainted and the front lip in raw finished carbon fiber. ReveMoto professionally prepares and paints the applicable exterior components using your selected factory paint code before the completed product is shipped to you. IMPORTANT - SPECIAL-ORDER PRODUCT: This ADRO product has an estimated total lead time of approximately 3 months from order placement to final delivery. Please review the Special-Order Lead Time section below before ordering. What This ADRO Front Face V2 Conversion Includes & Does ADRO Styling - Gives the M3 / M4 a wider, more aggressive front-end appearance Matched Bumper + Lip Package - The front lip is engineered exclusively for the V2 bumper for a seamless factory-look fit Authentic ADRO Product - Genuine ADRO components sourced for your order Painted to Match - Applicable exterior components are professionally painted using your selected factory paint code Injection-Molded Construction - Polypropylene (PP) construction designed for consistent fitment and durability Factory Mounting Locations - Designed by ADRO to install using factory attachment locations Ready to Install - Painted components arrive professionally finished before shipment What's Included in the ADRO Kit This ADRO Front Face V2 package includes: 1 ADRO M3 / M4 Front Bumper V2 1 Plastic Center Grille 1 Pair of Plastic Duct Vents (Left & Right) 1 Mesh Insert with ACC Radar Frame 1 Mesh Insert without ACC Radar Frame 1 Foam Energy Absorber Mounting Hardware 1 ADRO Carbon Fiber Front Lip V2 (wet carbon fiber, gloss finish) 3M Tape and Installation Screws for the Front Lip Important: The Front Bumper V2 and Carbon Fiber Front Lip V2 are included together as a matched pair - the front lip is not sold as a separate add-on. ADRO engineers the lip exclusively for the V2 bumper, so it is bundled into the base package rather than offered as an optional accessory. If your kit includes an ACC-radar sensor, use the ACC-radar mesh insert; otherwise use the non-radar mesh insert. Other optional accessories shown in ADRO product photography are not included unless specifically listed above. Painted Components ADRO Front Bumper V2 shell - professionally prepared and Painted to Match using your selected factory paint code, with the existing vehicle finish and condition taken into consideration Applicable exterior/body-color surfaces included with the bumper assembly ReveMoto professionally prepares, paints, clears, inspects, and packages the painted components before final shipment. Factory-Finish Components Components supplied by ADRO in a finished black, textured, mesh, or raw carbon fiber finish remain in their intended ADRO finish unless specifically stated otherwise. This includes applicable: Center Grille Duct Vents Mesh Inserts Foam Energy Absorber Carbon Fiber Front Lip - gloss wet carbon fiber finish, does not require painting Special-Order Lead Time - Approximately 3 Months This is a special-order ADRO product and requires additional fulfillment time compared with ReveMoto's standard painted body parts. Please allow approximately 3 months from order placement to final delivery. All lead times are estimates and may vary based on ADRO product availability, production volume, freight schedules, carrier delays, or other circumstances affecting fulfillment. Because this product must first be sourced from ADRO before entering ReveMoto's production process, ReveMoto's standard processing timeframe should not be used to estimate the total delivery date for this product. Why Choose the ADRO Front Face Look? Aggressive Front-End Styling - A wider stance and a carbon fiber lip shaped specifically to the V2 bumper's lines Purpose-Matched Design - Bumper and lip engineered together by ADRO, not a mixed/aftermarket pairing Clean OEM-Style Integration - Designed to integrate smoothly with factory headlights and kidney grilles Injection-Molded Polypropylene - Designed for consistent geometry, durability, and fitment Authentic ADRO Design - Not a replica or generic replacement bumper ReveMoto Paint-to-Match Finish - Combines ADRO styling with a professionally finished exterior Why Choose ReveMoto Authentic ADRO Product - Genuine ADRO components sourced for your vehicle Painted to Match Your M3 or M4 - Professionally finished using your selected factory paint code Ready to Install - No additional bumper painting required after delivery Automotive-Grade Finish - Professional basecoat and clear coat application Lifetime Paint Warranty - Coverage against qualifying peeling, cracking, and fading Nationwide Shipping - Delivered directly to your door Trusted by vehicle owners nationwide for professionally painted automotive body parts and specialty appearance upgrades. Key Features Vehicle Platform - BMW M3 (G80) / M4 (G82) Compatible Years (this listing) - 2021-2023 Product Style - ADRO Front Face V2 Brand - ADRO Manufacturer Type - Aftermarket Bumper Material - Polypropylene (PP) Front Lip Material - Wet Carbon Fiber Construction - Injection-Molded bumper shell; wet carbon fiber front lip Paint Finish - Professionally painted to match your selected factory paint code; front lip left in its gloss carbon fiber finish Installation - Professional installation recommended Estimated Total Lead Time - Approximately 3 months Compatibility (as stated by ADRO) ReveMoto relies on ADRO's own stated compatibility for fitment on this listing - a VIN is not required to determine fitment, since ADRO's engineering and application data (not chassis/VIN configuration) define which bumper and lip apply to your vehicle. ADRO G8X M3/M4 Front Bumper V2 compatibility, per ADRO: "2021+ BMW M3/M4 Standard, Competition, M3 CS (2023+), M4 CSL (2023), and M4 Convertible models" ADRO Carbon Fiber Front Lip V2 compatibility, per ADRO: "Exclusively compatible with the ADRO G8X Front Bumper V2 (model A14A11-2102) - will not fit other bumper versions" This ReveMoto listing is scoped to 2021-2023 model years. If your vehicle is a 2024-2026 M3/M4, M3 CS, M4 CSL, or M4 Convertible and you are unsure whether this package applies to your specific configuration, please contact ReveMoto to confirm before ordering - do not rely on the model year alone. Skip the Additional Paint Work No ordering an unfinished ADRO bumper and then searching for a separate body shop to paint it. ADRO supplies the bumper unpainted, and ReveMoto handles the professional paint-to-match process before final shipment. The carbon fiber front lip arrives in its finished gloss carbon weave and does not require painting. Your bumper arrives professionally painted and ready for installation, eliminating the need to arrange separate bumper refinishing after delivery. Frequently Asked Questions Q: Is this the V1 or V2 ADRO bumper? A: This listing is for ADRO's updated V2 Front Bumper and Carbon Fiber Front Lip - more defined air intakes, a wider and lower profile, and Polypropylene construction. If you're looking for ADRO's original V1 bumper and lip pairing (TPO construction) instead, contact ReveMoto or see our separate BMW M3/M4 ADRO Front Face V1 listing. Q: Is this an authentic ADRO product? A: Yes. This package features an authentic ADRO M3 / M4 front bumper and matching ADRO carbon fiber front lip, sourced for your order and professionally painted to match by ReveMoto. Q: What is included with this package? A: The ADRO front bumper (plastic center grille, duct vents, ACC-radar and non-radar mesh inserts, foam energy absorber, mounting hardware) and the matching ADRO carbon fiber front lip with 3M tape and installation screws. Q: Is the front lip painted? A: No. The carbon fiber front lip is left in its gloss wet carbon fiber finish and is not painted. Only the bumper shell is painted to match your selected factory paint code. Q: Is this an OEM BMW front bumper? A: No. This is an authentic ADRO aftermarket Front Face conversion designed for compatible 2021-2023 BMW M3 and M4 models. It is not a BMW OEM factory facelift bumper. Q: Are all accessories shown in the ADRO photos included? A: No. ADRO product photography may show optional accessories or other vehicle modifications. Only components specifically listed in the What's Included section are included with your order. Q: Is the bumper painted before shipping? A: Yes. ADRO supplies the bumper unpainted. ReveMoto professionally prepares and paints the applicable exterior components using the factory paint code selected with your order before final shipment. Q: Will the paint exactly match my vehicle? A: ReveMoto professionally prepares and Paints to Match the applicable components using your selected factory paint code while taking the existing vehicle finish and condition into consideration. Because automotive paint can change over time due to age, sunlight, environmental exposure, and previous refinishing, an exact factory match cannot be guaranteed based solely on the original paint code. Q: Does this fit both the BMW M3 and M4? A: Yes, for the 2021-2023 model years covered by this listing. See the Compatibility section above for ADRO's full stated compatibility, and contact ReveMoto to confirm fitment for M3 CS, M4 CSL, M4 Convertible, or 2024+ model years. Q: Is professional installation required? A: Professional installation is recommended to ensure proper fitment, alignment, and installation of the bumper, front lip, and included components. Q: How long will my order take? A: Please note the estimated lead time is approximately 3 months from order placement to delivery. This timeframe accounts for the sourcing of the ADRO product, ReveMoto's professional preparation and painting process, and final shipping, while allowing for potential supplier or carrier delays. Q: Does ReveMoto's standard 20-25 business day processing time apply? A: No. Because this is a special-order ADRO product that must first arrive at ReveMoto before production can begin, customers should plan for the approximately 3-month total lead time stated on this listing. Q: Is the ADRO bumper covered by ReveMoto's Lifetime Paint Warranty? A: ReveMoto's professional paintwork is backed by the ReveMoto Lifetime Paint Warranty against qualifying peeling, cracking, and fading, subject to ReveMoto's applicable warranty terms and conditions. The unpainted carbon fiber front lip is not part of the paint warranty. Q: Can I reuse my existing hardware? A: Certain factory clips, fasteners, and mounting hardware may be reusable depending on their condition and the application. A professional installer should inspect existing hardware during installation and replace worn, damaged, or incompatible pieces as necessary. Nationwide Delivery ReveMoto ships professionally painted automotive body parts and specialty ADRO products throughout the United States and Canada. Because this ADRO package is specially sourced before entering ReveMoto production, please allow approximately 3 months from order placement to final delivery. Each painted component is professionally prepared, painted, inspected, packaged, and shipped through ReveMoto's established fulfillment process. Upgrade Your M3 or M4 with ADRO Give your 2021-2023 BMW M3 or M4 the ADRO Front Face V2 appearance while eliminating the need to arrange separate paintwork after purchasing an unfinished bumper. Choose your factory paint code and let ReveMoto handle the ADRO sourcing, professional paintwork, quality control, and final delivery.