18 inch FPV Drone 8-20kg payload with 5.8G 3W VTX F722 Flying Tower 10KM Long Distance Drone Kit New

18 inch FPV Drone 8-20kg payload with F722 Flying Tower 5.8G 3W VTX 10KM Long Distance Drone Kit Our FPV drones accept deep customization, If you need to change or upgrade the configuration, please let us know your needs! Note: 18 inch drone frame, without any electronic accessories: ESC, flight control, image transmission, motor, camera, propeller blades; RTF version: includes: ESC, flight control, image transmission, motor, camera, blade; Excluding battery, charger, remote control Product parameters: Payload: 8-20kg Flying Time: With 8KG Load Flying Time: 25min; No Load: 40min 18inch FPV Drone Battery(Optional): 22000mAh 12S*2 (Two batteries connected in parallel) Flying Distance: 10km Max Speed: 100km/h(No Load) Max Altitude: 5000m Frame: 18-inch Carbon Structure: Mark 4 Bottom Plate Thickness: 4mm Top Plate Thickness: 2.2mm Carbon Plate Material: T300/T700 Height of Electronic Device Layer: 30mm Arm Thickness: 10mm Camera Spacing: 20mm Stack Mounting Hole: M3*30mm VTX Mounting Hole: M2*19/19 M3*30*30mm /M2*22*22mm Propeller Installation Size: Max 18 inch Motor Mounting Hole: 21mm*21mm/34mm*34mm Top Plate Size: 25*36cm Bottom Plate Size: 36*12.4cm Motor: 5020 230KV KV Value: 230KV Operating Rated Voltage: 8-12S No-load Current: 3A Motor Weight: 320g Maximum Current: 54A Maximum Power: 2536 W Motor Size: Ф62*58mm Flight Control(FC): F722 Size: 36×36mm Mounting Holes: 30.5×30.5mm 9V: 9V regulated power supply output interface, max current 2A 5V：5V regulated power supply output interface, maximum current 3A 4.5V： Receiver power connector (USB power supply only) CR: Current monitoring port M1: camera reference pin (according to the flight control firmware version) VI: Camera input port VO: Graphic output interface LED: RGB light strip interface B-: Connect to the negative terminal of the buzzer, positive terminal connects to B+ RC: Receiver SmartPort interface Rssi: Rssi signal input port ESC: 120A-12S Continuous Current: 120A BEC: No Current Sensor: Yes Battery Cells: 4-12S Size: 95.6*75mm Mounting Hole Spacing: 30.5*30.5mm Camera: Cam 1500TVL Model: HD 1500TVL (upgraded version, with OSD tuning board) Image Sensor: 1 / 3′CMOS Pixels: 1500TVL Lens: 2.1mm Signal System: PAL / NTSC (adjustable via OSD) Signal-to-Noise Ratio: > 60Db(AGC OFF) Electronic Shutter Speed: PAL: 1 / 50-100.000; NTSC: 1 / 60-100,000 Electronic Shutter: PAL: 1/50 - 100,000; NTSC: 1/60 - 100,000 Automatic Gain Control(AGC): Low/ Medium/ High Backlight Compensation(BLC): Yes Minimum Illumination: 0.001Lux / 1.2F WDR: D-WDR DNR: 3DNR Day/Night: Auto/Color/B&W Power Supply: DC 5V-30V VTX: 4.9/5.8G 3W(Customized) Supported Voltage: 9-36V BEC: 5V Transmission Power: 25/1000mW; 2000mW / Max Antenna Interface: MMCX Output Power: 3mW Standard 9 Channels: A/B/E/F/R/L/O/U/H Video Transmission Protocol: IRC Mounting Holes: 20X20mm / M2 Size: 54mm × 28mm × 13mm Weight: 32.5g Antenna: 5.8G RHCP 150MM *The whole is made of imported PC+ABS material which can withstand high strength impact *Impact resistant double-sheathed semi-rigid cable *Root reinforcement design, 360 ° protection RX: ELRS 915MHz Processing Chip: ESP8285 RF Chip: SX1276IMLTRT Power Input: 5V Operating Current: 100mA Operating Protocol: CSRF Receiving Frequency Range: 915MHz or 868MHz Size: 12mm12mm3mm Weight: 0.6g (No antenna included) Antenna Connector: IPEX1 Telemetry Output Power: <17dBm Firmware Update Method: WIFI Propellers: 1710 Type: 1710 Blades: 3 Material: Fiberglass Nylon Pitch: 10in Center Hole lnner diameter: 5mm Weight: 17g Package weight: 4.5kg Package size: 40*40*18cm Note: Package does not include a remote control; batteries and a charger are optional. **We are a source manufacturer and welcome bulk purchases! We also accept deep customization services for one unit. If you have any needs, please contact us!