Lunatone DALI-2 Phase Cut Sensor

Lunatone compact interface module converts 0–230V PhaseCut control signals into DALI dim levels. The incoming 0–230V voltage is broadcasted as a dimming value to the DALI subnet. Changes in the input voltage greater than 1% serve as event triggers. A minimum load is required for operation of the control device. The version with integrated DALI Power Supply (Art. Nr. 86468411-PS), provides 30mA for the subnet (up to 10 DALI ballasts). Expansion to up to 64 loads is possible using a DALI Expander. Specifications Technical data Ambient temperature -20°C to +60°C Protection class IP20/IP40 Connection wire cross section Max. 1.5mm² Mounting Back box, installation box Electrical data Input L,N(only Art.Nr.: 86468411-PS) Supply, mains voltage L, N Input voltage range 210Vac … 250Vac Input supply frequency 50-60Hz Max. power consumption 2 Watt DALI output Art.Nr.: 86468411 Output type DALI control: DA, DA Typ. current consumption 3mA DALI output Art.Nr.: 86468411-PS Output type DALI control and DALI power supply 30mA: DA+, DA- Output voltage range 12,0Vdc ... 20,5Vdc according to IEC62386 Guaranteed DALI supply current 30mA Max DALI supply current 250mA Function Device type Interface for converting 0-230V control signals to DALI dim levels Trigger Event Change in the input voltage signal (>1%) Configurable with DALI Cockpit PC Software Yes Dimensions Length 59mm Width 33mm Height 15mm Colour Grey Downloads Data Sheet