Bilstein B6 Front Strut | 1988-1991 BMW 325iX E30

Bilstein B6 Front Strut | 1988-1991 BMW 325iX E30 Refresh and tighten up the front suspension on your AWD E30 with the Bilstein B6 Performance Front Strut. This front strut insert is designed specifically for the 1988-1991 BMW 325iX E30, giving the ix chassis better front-end control, sharper response, and improved stability while retaining a street-friendly ride. Built with Bilstein’s proven 36mm monotube gas-pressure design, the B6 is an ideal upgrade for 325iX owners who want a stronger, more controlled damper without going to a full coilover setup. Sold individually. Order quantity 2 if replacing both front strut inserts. Overview The Bilstein B6 Performance front strut insert is a high-quality replacement and performance upgrade for the BMW E30 325iX. It is designed to improve damping control while keeping the car comfortable enough for real street use. Compared to a tired factory insert, the B6 helps reduce front-end float, brake dive, and vague steering feel. The result is a more composed front suspension that feels better during daily driving, backroad use, and spirited cornering. Perfect Match for a Proper 325iX Refresh The 325iX uses AWD-specific suspension components, so using the correct front strut insert matters. This Bilstein B6 insert is listed specifically for the E30 325iX front application. Key Features Bilstein B6 Performance front strut insert Designed for the 1988-1991 BMW 325iX E30 Fits front left or front right position 36mm monotube internal design Gas-pressure construction for consistent damping performance Application-specific valving for the 325iX chassis Improves front-end control, stability, and steering response Helps reduce excessive brake dive and body motion from worn factory dampers Designed to work with factory-style suspension layouts Great upgrade for street-driven restorations, OEM+ builds, and enthusiast cars Sold individually Order quantity 2 to replace both front strut inserts Bilstein Part #34-002513 EZT SKU: BIL34-002513 Front Strut Insert 36mm Monotube B6 Performance Sold Individually Technical Specs Brand Bilstein Product Line B6 Performance Manufacturer Part Number 34-002513 EZT SKU BIL34-002513 Position Front Orientation Front Left or Front Right Product Type Strut Insert / Strut Cartridge Internal Design Monotube Diameter 36mm Damping Non-adjustable OE Reference 31 32 1 133 563 Vehicle Fitment 1988-1991 BMW 325iX E30 Drivetrain Fitment AWD / ix models only Ride Height Requirement Stock height / 0 in. lift-drop Quantity Included 1 front strut insert Ordering Note Order quantity 2 to replace both front strut inserts This listing is for one individual front strut insert. If servicing both front sides of the vehicle, add quantity 2 to your cart. Fitment This Bilstein B6 front strut insert fits stock-height BMW E30 325iX models with 0 in. lift/drop. 1988 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop 1989 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop 1990 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop 1991 BMW 325iX Base E30 - Front - w/0 in. Lift/Drop Important Fitment Note This front strut insert is for the AWD E30 325iX front suspension only. It is not intended for standard RWD E30 models or E30 M3 models. If you are unsure whether this fits your vehicle, send us your VIN before ordering and we can help confirm compatibility. What’s Included 1 Bilstein B6 front strut insert Included Bilstein-supplied insert hardware, when applicable What’s Not Included Second front strut insert Rear shocks Front strut housings Springs Upper strut mounts Bump stops Dust boots Spring pads Factory mounting hardware unless supplied by Bilstein Alignment service Installation Notes Professional installation is recommended. This is a front strut insert and is installed into the existing front strut housing. Order quantity 2 if replacing both front strut inserts. Inspect the front strut housing before installation. Inspect or replace upper strut mounts, bump stops, dust boots, and spring pads during installation. An alignment is strongly recommended after suspension work. If pairing with lowering springs, confirm the spring and damper combination is appropriate for your intended use. EZT Recommendation For the best result, replace front strut inserts in pairs and inspect the full front suspension while everything is apart. On an older E30 325iX, fresh mounts and related wear items can make a huge difference in how the car feels after installation. Shipping Ships directly to your door with tracking once fulfilled. Product images may be for reference only. Actual strut insert design, label style, and included hardware may vary slightly depending on the manufacturer batch.