Premtool Straight Edge Brushed Stainless Steel Tile Trim

304 grade stainless steel — suitable for indoor and outdoor use including commercial applications. Also available in polished stainless steel. For a more cost-effective option see our brushed aluminium trim. The Premtool Straight Edge Brushed Stainless Steel Tile Trim delivers the same hard-wearing, corrosion-resistant performance as the polished version, with a satin brushed finish that is more forgiving in everyday use. The non-reflective surface hides fingerprints, minor surface marks, and light scratches better than polished stainless — making it the preferred choice for high-traffic areas, commercial spaces, and anywhere the trim will be regularly touched or cleaned. Made from 304 grade stainless steel, it is equally suited to indoor and outdoor use, and resists the adhesion of bacteria and micro-organisms. Supplied with a protective film. Available in 7 depths from 6mm to 25mm. 2.5m length Sizes: 6mm to 25mm — 7 depths Indoor & outdoor use 304 grade stainless steel Hides marks better than polished Material 304 Stainless Steel Length 2.5m per length Profile depth (D) 6 / 8 / 10 / 12.5 / 15 / 20 / 25mm Finish Brushed Brand Premtool Application Indoor & outdoor outdoor rated Grade 304 corrosion resistant Protection Peel-off film Suitable for Wall and floor tile edge finishing Indoor and outdoor installations Residential and commercial projects Wet rooms, swimming pool surrounds, and external tiling Commercial kitchens and food preparation areas Not suitable for Heavily chlorinated or salt water environments — consider 316 grade Prolonged contact with strong acids or bleach-based cleaners Direct contact with dissimilar metals without isolation Brushed vs polished stainless steel — which finish should I choose? Choose brushed when The trim will be regularly touched or cleaned Working with matte or textured tiles A contemporary, understated finish is preferred Matching brushed stainless fixtures Choose polished when A high-shine, mirror-like finish is required Working with gloss or polished tiles Matching polished chrome or stainless fittings How to fit & cut stainless steel tile trim Cutting to length 1 Measure and mark. Always measure twice.Leave protective film on until complete. 2 Cut with an angle grinder with stainless disc or fine-tooth metal mitre saw.Do not use aluminium or wood blades. 3 For corners, mitre at 45°.Secure firmly before cutting. 4 Deburr all cut edges.Cut stainless edges are extremely sharp. Use gloves. Fitting the trim 1 Dry-fit first. Trim depth should be 1.5–2.0mm greater than the tile. 2 Apply adhesive and bed fixing tab firmly in.Use waterproof flexible adhesive for external installations. 3 Bed tiles firmly against trim. Keep brushed face clean.Remove adhesive immediately with a damp cloth. 4 Grout the joint, then peel off the protective film.Do not peel film before grouting.