ADAM AUDIO SUB10 PRO - Subwoofer delivering intelligent bass -DSP technology

The Sub10 PRO combines advanced DSP, powerful low-frequency audio reproduction and network-based calibration for stereo and multichannel monitoring systems. Its high-excursion 10” woofer and Class D amplifier deliver plentiful SPLs with minimal distortion thanks to the FEA-optimized bass port. Professional connectivity on the backplate includes AES3 digital, balanced analog XLR and TRS, precise phase and crossover controls, plus a footswitch input for bass management. ADAM Control facilitates manual calibration over 4-bands of parametric EQ, plus the deployment of Sonarworks calibration profiles and firmware updates. Three operating modes – Stereo, LFE and Wide – support conventional 2.1, immersive, and full-range applications. A robust wooden cabinet and protective metal grille ensure durability that is backed by a 2-year warranty, extendable to 5 years upon product registration. Fiber-reinforced, paper-based 10” Woofer Total Peak Amp. Power: 200 WCalibration options: ADAM Control, SoundID Reference by Sonarworks, Backplate Frequency Response @ -6 dB: 21 - 300 Hz Max. SPL at 1 m (Peak): 106 dB SPL General Data Cabinet Design: Front Fire and front ported Cabinet Material: Vinyl wrapped MDF and painted MDF front panel Power consumption (max, standby): 450 W, 2.5 W AC Input Voltage: 100 – 240 V, 50/60 Hz Power Rating: 450 W max. Operating Conditions: -10° C to +40° C (+14° F to +104° F); <75% RH, non-condensing Weight: 22.8 kg (50 lbs 4 oz) Dimensions (Height x Width x Depth): 450 mm x 360 mm x 450 mm (17 3/4″ x 14 1/8″ x 17 3/4″) Warranty: 5 years (2 years warranty plus 3 years optional with product registration) Delivery Contents: Sub10 PRO subwoofer, power cable, Quick Start Guide Audio Connectors Analog Inputs: 2 x XLR / TRS combi Digital Input: XLR AES3 Analog Input Impedance: 25 kOhm Digital Input Impedance: 110 Ohm Max. Input Level: +19 dBu Analog Outputs: 2 x XLR Digital Outputs: XLR AES3 Amplification Amplifier Type: PWM Peak (10% THD, limiter deactivated): 325 W RMS (1% THD, limiter deactivated): 200 W @ 3 Ohm Control Options [via Network] Networking Connector: RJ45 Connection Type: Ethernet Communication Protocol: AES70 / TCP Control Software: ADAM Control (Windows and MacOS available) Advanced Room Adaptation: 4-bands QEQ Third-party calibration compatibility: Sonarworks SoundID Reference Acoustics Frequency Response @ -3 dB: 22 – 264 Hz Frequency Response @ -6 dB: 21 – 300 Hz Crossover Frequencies: 70, 85, 100, 115 Hz (variable via ADAM Control) Max SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (RMS): 106 dB SPL Max SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (Peak): 110 dB SPL Max SPL in full space at 1 m with sine bursts (average 25 Hz to 50 Hz) @ 10% THD (RMS): 102 dB SPL Max SPL in full space at 1 m with sine bursts (average 25 Hz to 50 Hz) @ 10% THD (Peak): 105 dB SPL Max peak SPL in full space at 1 m with IEC-weighted noise (full range): 113 dB SPL Max peak SPL in full space at 1 m with IEC-weighted noise (85 Hz bass managed): 114 dB SPL Dolby DARDT max SPL in full space (full range bass managed): 113 dB SPL Driver Basket Diameter: 10″ Voice Coil Diameter: 1 3/4″ (45 mm) Cone Material: Paper, fiber-reinforced Signal Processing AD converter: 24-bit (via XLR/TRS inputs) Internal sample rate: 96 kHz Delay range and resolution: 0 – 10 ms, 32-bit Protection: Independent peak and thermo limiters, over current protection, over temperature protection, under voltage protection Control Options [via Backplate] Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting, full space Level: -18 dB to +6 dB Input Selection: Analog, digital Phase: 0°, -45°, -90°, 135°, 180°, -225°, -270°, -315° Bass Management: 70, 85, 100, 115 Hz Operational Modes: Remote Control, Local / Stereo, LFE (<120Hz), Wide Bypass: Yes, via footswitch (not included) and TRS connection (latched)